Korisnički račun Kontakt
Vaša košarica
DPD i FedEx – datum dostave na stranici proizvoda
Trebate pomoć? Pitajte našeg AI asistenta

InLine optički simplex kabel, FTTH, LC/APC8° na LC/APC8° 9/125µm OS2 3m

InLine optički simplex kabel, FTTH, LC/APC8° na LC/APC8° 9/125µm OS2 3m
InLine optički simplex kabel, FTTH, LC/APC8° na LC/APC8° 9/125µm OS2 3m
InLine optički simplex kabel, FTTH, LC/APC8° na LC/APC8° 9/125µm OS2 3m
InLine optički simplex kabel, FTTH, LC/APC8° na LC/APC8° 9/125µm OS2 3m
InLine optički simplex kabel, FTTH, LC/APC8° na LC/APC8° 9/125µm OS2 3m
InLine optički simplex kabel, FTTH, LC/APC8° na LC/APC8° 9/125µm OS2 3m
11,27 €
PDF
PDF
Dostupnost 32 Šifra proizvoda 1429531 Model 88203 Jamstvo 2 godine

Dostava i povrat

Očekivana dostava utorak, 1. prosinca
Naš detaljni sustav za praćenje pošiljaka redovito će Vas obavještavati o statusu
Mogućnosti plaćanja
Platna karticaVisaMastercardPayPalApple PayGoogle PayBankovna uplata

Postavite pitanje – AI asistent odgovara odmah.

Opis

Fiber optic simplex cable InLine LC/APC to LC/APC OS2 9/125µm 3m is a single‑fiber patch cable designed for FTTH and singlemode links. The cable uses OS2 singlemode fibre with 9/125 µm core/cladding and LC/APC 8° polished connectors on both ends, offering low insertion loss and high return loss for subscriber terminations, optical patching and backbone connections. The cable comes in a white, jacketed 3 m length with an armoured 3.0 mm outer diameter and a stainless steel spiral tube reinforcement for improved mechanical stability and longevity.

Advantages

The armored construction with a stainless steel spiral tube and a 3.0 mm halogen‑free outer jacket provides increased tensile strength and protection against mechanical damage compared with thin pre‑installed cables. LC/APC 8° polished connectors deliver low insertion loss (typical <0.20 dB) and high return loss (>60 dB), which supports stable singlemode signal transmission. The neutral white sheath allows discreet installation in living areas and the cable is supplied with a factory test report and conformity to relevant IEC standards.

Suitable for

  • FTTH subscriber connections between the living‑unit outlet and an optical modem
  • Optical patching panels and distribution frames in singlemode networks
  • Short backbone or equipment interconnects where low loss and APC polish are required
  • Replacement of low‑quality pre‑installed thin fibres in apartments and homes

Key specifications

  • Fibre type: OS2 singlemode, 9/125 µm core/cladding
  • Connector type: LC to LC, APC polish, 8°
  • Cable length: 3 m
  • Outer diameter: approx. 3.0 mm ±0.2 mm, armoured
  • Outer jacket: halogen‑free, white
  • Construction: stainless steel spiral tube reinforcement
  • Typical insertion loss: <0.20 dB; max insertion loss: <0.30 dB
  • Return loss: >60 dB
  • Operating temperature range: -40 to +85 °C

How to use

Route the 3 m cable between the optical outlet or patch panel and the singlemode modem or device, taking care to avoid sharp bends and compressive loads on the cable. Insert the LC/APC connectors into compatible LC/APC ports until they click, ensuring the 8° APC ferrule is correctly aligned. Do not remove the protective dust caps from connectors until immediately before insertion. After installation, verify optical continuity and loss using appropriate test equipment or the supplied test report.

Recommendations

Avoid bending the cable below the manufacturer's minimum bend radius, protect connector endfaces from dust and contamination, and secure the cable to prevent strain on connector interfaces. For FTTH installations, prefer the 3.0 mm armoured version over thin 1.6 mm pre‑installed fibre to reduce the risk of damage during handling and everyday use.

How to use

Route the 3 m cable between the optical outlet or patch panel and the singlemode modem or device, taking care to avoid sharp bends and compressive loads on the cable. Insert the LC/APC connectors into compatible LC/APC ports until they click, ensuring the 8° APC ferrule is correctly aligned. Do not remove the protective dust caps from connectors until immediately before insertion. After installation, verify optical continuity and loss using appropriate test equipment or the supplied test report.

Recommendations

Avoid bending the cable below the manufacturer's minimum bend radius, protect connector endfaces from dust and contamination, and secure the cable to prevent strain on connector interfaces. For FTTH installations, prefer the 3.0 mm armoured version over thin 1.6 mm pre‑installed fibre to reduce the risk of damage during handling and everyday use.

Ključne značajke
  • Halogen free outer Jacket
  • Armoured Cable OD: 3.0mm±0.2mm
  • flexible metal tubing one core
  • Fiber: OS2 9/125µm - single Mode
  • I-VH-2E,G.652.D
  • APC 8° Polished
  • IL<0.30dB,RL>60dB
  • IL(typical)<0.20dB
  • with test report
  • Conform IEC 610304-2 IEC60332-3-1 IEC60754-2 IEC 61754-20
  • Operating Temperature: -40 to +85°C
  • Storage Temperature: -40 to +85°C
  • OS2
  • 3 m
  • LC Male
  • LC Male
  • Connector polish type: APC
  • Single-mode
  • White

Specifikacije

Specifikacije
Boja proizvoda
Bijela
Dimenzije (ŠxVxD)
170 x 3000 x 15 mm
Dubina pakiranja
170 mm
Duljina kabela
3 m
Gubitak umetanja
0.3 dB
Konektor 2
LC
Potpuni dupleks
Ne
Povratni gubitak
60 dB
Priključak 1
LC
Promjer jezgre
9 µm
Promjer kabela
3 mm
Promjer plašta
125 µm
Radna temperatura (T-T)
-40 - 85 °C
Širina pakiranja
170 mm
Spol konektora 1
Muški
Spol konektora 2
Muški
Struktura modova vlakna
Jednomodni
Temperatura skladištenja (T-T)
-40 - 85 °C
Testni protokol u kompletu
Da
Težina
44 g
Težina pakiranja
51 g
Visina pakiranja
15 mm
Volumen paketa
500 cm³
Vrsta optičkog vlakna
OS2
Vrsta poliranja konektora
APC

Letak

Otvori Letak
Povijest cijene u posljednjih 6 mjeseci
InLine optički simplex kabel, FTTH, LC/APC8° na LC/APC8° 9/125µm OS2 3m
Trenutačna cijena
11,27 €
Najniža cijena 7 d.
9,49 €
Najviša cijena 7 d.
11,27 €
Promjena 24 h
0,00 €   0%
Promjena 7 d.
+1,78 €   +19%
Promjena 30 d.
+1,86 €   +20%

Napiši recenziju

Ocjena *
Napomena: HTML se ne prevodi!

Ista serija i alternative

12

Popularni proizvodi u ovoj kategoriji

7
Prodavatelj: UAB KUR LT · Gariūnų g. 57-14, LT-02300 Vilnius, Litva · Matični broj 303192950 · PDV ID LT100008198612 · Isporuka iz EU-a (Litva)
WhatsApp
Messenger
Pozdrav, ja sam AI asistent DistriNodea. Mogu Vam pomoći pronaći proizvode, usporediti mogućnosti, izraditi ponude u PDF formatu ili otvoriti zahtjev za podršku.
Sve kategorije