Korisnički račun Kontakt
Vaša košarica
DPD i FedEx – datum dostave na stranici proizvoda
Trebate pomoć? Pitajte našeg AI asistenta

InLine optički simplex kabel, FTTH, LC/APC8° na SC/APC8° 9/125µm OS2 20m

InLine optički simplex kabel, FTTH, LC/APC8° na SC/APC8° 9/125µm OS2 20m
InLine optički simplex kabel, FTTH, LC/APC8° na SC/APC8° 9/125µm OS2 20m
InLine optički simplex kabel, FTTH, LC/APC8° na SC/APC8° 9/125µm OS2 20m
InLine optički simplex kabel, FTTH, LC/APC8° na SC/APC8° 9/125µm OS2 20m
InLine optički simplex kabel, FTTH, LC/APC8° na SC/APC8° 9/125µm OS2 20m
InLine optički simplex kabel, FTTH, LC/APC8° na SC/APC8° 9/125µm OS2 20m
16,97 €
PDF
PDF
Dostupnost 22 Šifra proizvoda 1429497 Model 88420 Jamstvo 2 godine

Dostava i povrat

Očekivana dostava četvrtak, 3. prosinca
Naš detaljni sustav za praćenje pošiljaka redovito će Vas obavještavati o statusu
Mogućnosti plaćanja
Platna karticaVisaMastercardPayPalApple PayGoogle PayBankovna uplata

Postavite pitanje – AI asistent odgovara odmah.

Opis

Fiber optical simplex cable InLine LC/APC8° to SC/APC8° OS2 9/125µm FTTH 20m is a 20-metre single-mode fiber patch cable designed for FTTH installations and point-to-point connections. It uses OS2 9/125 µm fiber and carries an LC/APC 8° connector on one end and an SC/APC 8° connector on the other. The cable has a slim white LSZH jacket and an armoured core with a stainless steel spiral tube for improved mechanical protection. It is intended for indoor and sheltered outdoor routing to connect the building transfer point to the fiber modem or to extend existing fiber links in broadband and telecom networks.

Advantages

The InLine FTTH cable combines a 3.0 mm outer diameter with a reinforced metal tubing around the fiber, providing greater robustness than thin installer-supplied leads. Its low-smoke, zero-halogen jacket reduces hazardous emissions in case of fire and the white sheath supports discreet installation in living areas. APC 8° polished connectors offer low back reflection and stable insertion loss values, and each cable is supplied with a test report confirming typical insertion loss and return loss performance.

Suitable for

  • Connecting a fiber network termination point to an optical modem or ONT in a home or office
  • Patching or extending single-mode fiber links in FTTH and broadband deployments
  • Point-to-point indoor fiber runs where mechanical protection and low back reflection are required

Key specifications

  • Fiber type: Single-mode OS2, 9/125 µm
  • Length: 20 m
  • Connectors: LC/APC 8° (one end) to SC/APC 8° (other end)
  • Connector polish: APC (8° angled polish)
  • Cable outer diameter: approx. 3.0 mm ±0.2 mm
  • Armouring: stainless steel spiral tube for core reinforcement
  • Jacket material: Low Smoke Zero Halogen (LSZH), white
  • Typical insertion loss: <0.20 dB (typical), <0.30 dB (max)
  • Return loss: >60 dB
  • Standard compliance: relevant IEC connectivity and fire/safety standards
  • Operating temperature range: -40 °C to +85 °C

How to use

Route the cable from the fiber termination point to the optical modem or ONT, avoiding sharp bends and tight radii; observe the manufacturer’s minimum bend radius to protect the fiber. Clean connector endfaces before mating using appropriate fiber cleaning tools to ensure low insertion loss and reliable signal transmission. Insert the LC connector into the modem’s LC port and the SC connector into the corresponding SC/APC receptacle or adapter, ensuring proper orientation for APC angled interfaces. Secure the cable along its run to prevent strain on the connectors and avoid crushing or kinking the armoured sheath.

Recommendations

For best results, store and install the cable within the specified temperature range and use dust caps on connectors when not connected. Periodically inspect connector endfaces and clean as needed; when routing outdoors or in exposed locations use additional conduit or trunking for UV and mechanical protection despite the reinforced core.

How to use

Route the cable from the fiber termination point to the optical modem or ONT, avoiding sharp bends and tight radii; observe the manufacturer’s minimum bend radius to protect the fiber. Clean connector endfaces before mating using appropriate fiber cleaning tools to ensure low insertion loss and reliable signal transmission. Insert the LC connector into the modem’s LC port and the SC connector into the corresponding SC/APC receptacle or adapter, ensuring proper orientation for APC angled interfaces. Secure the cable along its run to prevent strain on the connectors and avoid crushing or kinking the armoured sheath.

Recommendations

For best results, store and install the cable within the specified temperature range and use dust caps on connectors when not connected. Periodically inspect connector endfaces and clean as needed; when routing outdoors or in exposed locations use additional conduit or trunking for UV and mechanical protection despite the reinforced core.

Ključne značajke
  • Halogen free outer Jacket
  • Armoured Cable OD:3.0mm±0.2mm
  • flexible metal tubing one core
  • Fiber: OS2 9/125µm - single Mode
  • I-VH-2E,G.652.D
  • APC 8° Polished
  • IL<0.30dB,RL>60dB
  • IL(typical)<0.20dB
  • with test report
  • Conform IEC 610304-2 IEC60332-3-1 IEC60754-2 IEC 61754-20
  • Operating Temperature: -40 to +85°C
  • Storage Temperature: -40 to +85°C
  • FTTH OS2
  • 20 m
  • LC Male
  • SC Male
  • Connector polish type: APC
  • Jacket material: Low smoke zero halogen (LSZH)
  • Single-mode
  • White

Specifikacije

Specifikacije
Boja proizvoda
Bijela
Certifikacija
IEC 610304-2 IEC60332-3-1 IEC60754-2 IEC 61754-20
Dimenzije (ŠxVxD)
200 x 20000 x 25 mm
Dubina pakiranja
200 mm
Duljina kabela
20 m
Količina po pakiranju
1 pc(s)
Konektor 2
SC
Materijal plašta
Bez halogena, mala emisija dima (LSZH)
Plug and Play
Da
Potpuni dupleks
Ne
Priključak 1
LC
Promjer jezgre
9 µm
Promjer kabela
3 mm
Promjer plašta
125 µm
Radna temperatura (T-T)
-40 - 85 °C
Širina pakiranja
200 mm
Spol konektora 1
Muški
Spol konektora 2
Muški
Struktura modova vlakna
Jednomodni
Temperatura skladištenja (T-T)
-40 - 85 °C
Testni protokol u kompletu
Da
Težina
295 g
Težina pakiranja
315 g
Visina pakiranja
25 mm
Volumen paketa
1000 cm³
Vrsta kabela
FTTH
Vrsta optičkog vlakna
OS2
Vrsta poliranja konektora
APC

Letak

Otvori Letak
Povijest cijene u posljednjih 6 mjeseci
InLine optički simplex kabel, FTTH, LC/APC8° na SC/APC8° 9/125µm OS2 20m
Trenutačna cijena
16,97 €
Najniža cijena 7 d.
16,97 €
Najviša cijena 7 d.
18,56 €
Promjena 24 h
-0,74 €   -4%
Promjena 7 d.
-1,58 €   -9%
Promjena 30 d.
-0,74 €   -4%

Napiši recenziju

Ocjena *
Napomena: HTML se ne prevodi!

Ista serija i alternative

12

Popularni proizvodi u ovoj kategoriji

7
Prodavatelj: UAB KUR LT · Gariūnų g. 57-14, LT-02300 Vilnius, Litva · Matični broj 303192950 · PDV ID LT100008198612 · Isporuka iz EU-a (Litva)
WhatsApp
Messenger
Pozdrav, ja sam AI asistent DistriNodea. Mogu Vam pomoći pronaći proizvode, usporediti mogućnosti, izraditi ponude u PDF formatu ili otvoriti zahtjev za podršku.
Sve kategorije