Korisnički račun Kontakt
Vaša košarica
DPD i FedEx – datum dostave na stranici proizvoda
Trebate pomoć? Pitajte našeg AI asistenta

InLine optički simplex kabel, FTTH, SC/APC8° na SC/APC8° 9/125µm OS2 10m

InLine optički simplex kabel, FTTH, SC/APC8° na SC/APC8° 9/125µm OS2 10m
InLine optički simplex kabel, FTTH, SC/APC8° na SC/APC8° 9/125µm OS2 10m
InLine optički simplex kabel, FTTH, SC/APC8° na SC/APC8° 9/125µm OS2 10m
InLine optički simplex kabel, FTTH, SC/APC8° na SC/APC8° 9/125µm OS2 10m
InLine optički simplex kabel, FTTH, SC/APC8° na SC/APC8° 9/125µm OS2 10m
InLine optički simplex kabel, FTTH, SC/APC8° na SC/APC8° 9/125µm OS2 10m
14,91 €
PDF
PDF
Dostupnost 45 Šifra proizvoda 2399616 Model 88310 Jamstvo 2 godine

Dostava i povrat

Očekivana dostava utorak, 1. prosinca
Naš detaljni sustav za praćenje pošiljaka redovito će Vas obavještavati o statusu
Mogućnosti plaćanja
Platna karticaVisaMastercardPayPalApple PayGoogle PayBankovna uplata

Postavite pitanje – AI asistent odgovara odmah.

Opis

InLine Fiber Optical Simplex Cable FTTH SC/APC 8° to SC/APC 8° 9/125µm OS2 10m is a single‑mode patch cable designed for FTTH connections and short optical links inside homes and small installations. The cable uses SC connectors with APC 8° polish at both ends and OS2 9/125µm fiber to support low‑loss broadband transmission. The white outer sheath and a 3.0 mm armoured construction with stainless steel spiral reinforcement provide a compact, robust link between the house transfer point and the fiber optic modem or ONT.

Advantages

This InLine FTTH simplex cable offers low insertion loss and high return loss typical of APC‑polished connectors, making it suitable for sensitive single‑mode networks. The armoured 3.0 mm outer diameter and stainless steel spiral tube increase mechanical protection compared with very thin provider‑supplied leads, reducing the risk of breakage during installation or everyday use. The halogen‑free jacket and neutral white colour allow discreet placement in living spaces while meeting common safety and emission standards.

Suitable for

  • Connecting the home fiber termination point (FTTH outlet) to an optical modem or ONT.
  • Patching or linking optical devices requiring SC/APC angled terminations.
  • Short indoor fiber runs in apartments, homes or small offices up to 10 m.
  • Replacement of fragile provider‑supplied jumper cables with a more robust armoured alternative.

When it may not be suitable

This cable is single‑mode OS2 with SC/APC 8° connectors and is not suitable for multimode networks or for systems requiring different connector types (for example LC, ST or SC/UPC). It is intended for indoor FTTH and short patch runs; it is not a full outdoor exterior cable designed for direct burial or long outdoor spans without additional protection.

Key specifications

  • Fiber type: single‑mode OS2, 9/125 µm
  • Connector type: SC/APC 8° to SC/APC 8°
  • Cable length: 10 m
  • Outer diameter: approx. 3.0 mm (armoured construction)
  • Jacket: halogen‑free white sheath
  • Insertion loss (typical): <0.20 dB, guaranteed <0.30 dB
  • Return loss: >60 dB (APC polish)
  • Operating temperature range: -40 °C to +85 °C
  • Construction: stainless steel spiral tube reinforcement

How to use

Connect one SC/APC connector to the FTTH outlet or wallbox and the other SC/APC connector to the optical modem or ONT. Handle connectors by the ferrule housing and avoid touching the polished end faces; keep protective caps on until final connection. When routing the cable indoors, follow gentle bends and avoid sharp kinks — the 3.0 mm armoured design allows flexible routing but still requires respect for minimum bend radius as specified by the installer. After installation, verify link quality with the installer’s test equipment or use the provided test report if available.

What to consider before purchase

  • Verify that your equipment supports SC/APC connectors and single‑mode OS2 fiber.
  • Confirm that a 10 m cable length is sufficient for the intended routing and placement of the modem.
  • Choose an armoured indoor cable only if extra mechanical protection is needed; for purely concealed cabling, an unarmoured thin jumper may be acceptable.

Recommendations

Use the InLine FTTH SC/APC 10 m cable for indoor fiber links where reliability and mechanical protection are important. Keep connector end caps on until connection, avoid bending below the recommended radius, and perform an insertion loss check after installation to ensure optimal performance.

How to use

Connect one SC/APC connector to the FTTH outlet or wallbox and the other SC/APC connector to the optical modem or ONT. Handle connectors by the ferrule housing and avoid touching the polished end faces; keep protective caps on until final connection. When routing the cable indoors, follow gentle bends and avoid sharp kinks — the 3.0 mm armoured design allows flexible routing but still requires respect for minimum bend radius as specified by the installer. After installation, verify link quality with the installer’s test equipment or use the provided test report if available.

Recommendations

Use the InLine FTTH SC/APC 10 m cable for indoor fiber links where reliability and mechanical protection are important. Keep connector end caps on until connection, avoid bending below the recommended radius, and perform an insertion loss check after installation to ensure optimal performance.

Ključne značajke
  • Halogen free outer Jacket
  • Armoured Cable OD: 3.0mm±0.2mm
  • flexible metal tubing one core
  • Fiber: OS2 9/125µm - single Mode
  • I-VH-2E,G.652.D
  • APC 8° Polished
  • IL<0.30dB,RL>60dB
  • IL(typical)<0.20dB
  • with test report
  • Conform IEC 610304-2 IEC60332-3-1 IEC60754-2 IEC 61754-20
  • Operating Temperature: -40 to +85°C
  • Storage Temperature: -40 to +85°C
  • OS2
  • 10 m
  • SC Male
  • SC Male
  • Connector polish type: APC
  • Single-mode
  • White

Specifikacije

Specifikacije
Boja proizvoda
Bijela
Dimenzije (ŠxVxD)
195 x 10000 x 14 mm
Dubina pakiranja
180 mm
Duljina kabela
10 m
Gubitak umetanja
0.3 dB
Konektor 2
SC
Potpuni dupleks
Ne
Povratni gubitak
60 dB
Priključak 1
SC
Promjer jezgre
9 µm
Promjer kabela
3 mm
Promjer plašta
125 µm
Radna temperatura (T-T)
-40 - 85 °C
Širina pakiranja
195 mm
Spol konektora 1
Muški
Spol konektora 2
Muški
Struktura modova vlakna
Jednomodni
Temperatura skladištenja (T-T)
-40 - 85 °C
Testni protokol u kompletu
Da
Težina
151 g
Težina pakiranja
164 g
Visina pakiranja
14 mm
Volumen paketa
500 cm³
Vrsta optičkog vlakna
OS2
Vrsta poliranja konektora
APC

Letak

Otvori Letak
Povijest cijene u posljednjih 6 mjeseci
InLine optički simplex kabel, FTTH, SC/APC8° na SC/APC8° 9/125µm OS2 10m
Trenutačna cijena
14,91 €
Najniža cijena 7 d.
13,31 €
Najviša cijena 7 d.
14,91 €
Promjena 24 h
0,00 €   0%
Promjena 7 d.
+1,60 €   +12%
Promjena 30 d.
+1,76 €   +13%

Napiši recenziju

Ocjena *
Napomena: HTML se ne prevodi!

Ista serija i alternative

12

Popularni proizvodi u ovoj kategoriji

7
Prodavatelj: UAB KUR LT · Gariūnų g. 57-17, LT-02300 Vilnius, Litva · Matični broj 303192950 · PDV ID LT100008198612 · Isporuka iz EU-a (Litva)
WhatsApp
Messenger
Pozdrav, ja sam AI asistent DistriNodea. Mogu Vam pomoći pronaći proizvode, usporediti mogućnosti, izraditi ponude u PDF formatu ili otvoriti zahtjev za podršku.
Sve kategorije