Korisnički račun Kontakt
Vaša košarica
DPD i FedEx – datum dostave na stranici proizvoda
Trebate pomoć? Pitajte našeg AI asistenta

Svrdlo KWB 206555 5,5 mm 1 komad

Svrdlo KWB 206555 5,5 mm 1 komad
Svrdlo KWB 206555 5,5 mm 1 komad
16,22 €
PDF
PDF
Dostupnost 15 Šifra proizvoda 2250357 Model 206555 Jamstvo 2 godine

Dostava i povrat

Očekivana dostava ponedjeljak, 14. prosinca
Naš detaljni sustav za praćenje pošiljaka redovito će Vas obavještavati o statusu
Mogućnosti plaćanja
Platna karticaVisaMastercardApple PayGoogle PayBankovna uplata

Opis

The KWB 206555 drill bit is a 5.5 mm precision ground twist drill made to DIN 338 with right-hand cut, type N. It has a self-colour finish, a 135° tip angle and is cross-ground to DIN 1412 C for self-centering performance. The cylindrical shank and industrial quality construction make it suitable for drilling steel, alloyed steel, cast steel, die castings, sintered steel, non‑ferrous metals and hard plastics. Supplied as a single piece in a blister pack, the drill bit is intended for accurate general-purpose drilling where a standard DIN-compliant tool is required.

Advantages

Precision grinding and adherence to DIN 338 ensure consistent geometry and reliable cutting action. The 135° tip and cross-ground point improve centering and reduce walking at drill start. Industrial-quality steel construction provides wear resistance across a range of materials. The cylindrical shank fits standard chucks and the single-piece blister pack protects the tool during storage and transport.

Suitable for

Key specifications

How to use

Clamp the 5.5 mm KWB 206555 drill bit securely in a compatible chuck. Select appropriate spindle speed and feed for the work material — lower speeds for harder metals, higher speeds for non‑ferrous metals and plastics. Use cutting fluid when drilling steels and alloyed steels to improve tool life and chip evacuation. Start drilling with light pressure to allow the self‑centering cross-ground tip to locate the hole, then apply steady feed until the hole is completed.

Recommendations

For best results, use appropriate cutting oil when machining steels, ensure correct spindle speed for the material, and replace the drill if excessive wear or chipping appears. Store the drill in its blister pack or a protective case to avoid damage to the ground tip.
Ključne značajke
  • Drilling holes in steel and alloyed steel
  • Working with cast steel and die castings
  • Processing sintered steel and non‑ferrous metals
  • Drilling hard plastics
  • Brand: KWB
  • MPN: 206555
  • EAN: 4009312065550
  • Diameter: 5.5 mm
  • Standard: DIN 338, type N
  • Cut: Right hand
  • Tip angle: 135°; cross-ground to DIN 1412 C (self-centering)
  • Finish: Self colour (uncoated), precision ground
  • Shank: Cylindrical
  • Package: 1 pc, blister

Specifikacije

Specifikacije
Boja proizvoda
Srebrna
Broj svrdala
1 pc(s)
Kut vrha
135 °
Materijal svrdla
Brzorezni čelik (HSS)
Namjenska uporaba
Bušilica
Precizno brušeni rezni rubovi
Da
Prikladno za materijale
Tvrda plastika, obojeni metal, čelik
Promjer svrdala za metal
5.5
Promjer svrdla
5.5 mm
Smjer okretanja
Desni smjer vrtnje
Sukladnost s DIN-om
338
Vrsta pakiranja
Blister pakiranje
Povijest cijene u posljednjih 6 mjeseci
Svrdlo KWB 206555 5,5 mm 1 komad
Trenutačna cijena
16,22 €
Najniža cijena 7 d.
16,03 €
Najviša cijena 7 d.
16,22 €
Promjena 24 h
0,00 €   0%
Promjena 7 d.
+0,19 €   +1%
Promjena 30 d.
0,00 €   0%

Napiši recenziju

Ocjena *
Napomena: HTML se ne prevodi!

Više KWB proizvoda u ovoj kategoriji

12

Popularni proizvodi u ovoj kategoriji

8
Prodavatelj: UAB KUR LT · Gariūnų g. 57-14, LT-02300 Vilnius, Litva · Matični broj 303192950 · PDV ID LT100008198612 · Isporuka iz EU-a (Litva)
WhatsApp
Messenger
Pozdrav, ja sam AI asistent DistriNodea. Mogu Vam pomoći pronaći proizvode, usporediti mogućnosti, izraditi ponude u PDF formatu ili otvoriti zahtjev za podršku.
Sve kategorije