Svrdlo Einhell 3437010 promjer 12 cm duljina 800 mm

The auger is an accessory designed for use with the Einhell GP-EA 18/150 Li BL cordless earth auger. It has a drilling diameter of 120 mm and a drilling length of 800 mm, allowing holes up to approximately 80 cm deep in garden soil. The auger is intended for tasks such as installing fence posts, planting shrubs or trees, and making holes for garden fixtures and decorations.

Advantages

This auger offers a large 120 mm diameter for creating wide planting or post holes and an 800 mm length that provides substantial drilling depth without the need for multiple extensions. It is lightweight for its size, facilitating handling with a compatible cordless earth auger, and is made to match the specifications of the Einhell system for straightforward attachment and operation.

Suitable for

• Drilling planting holes for shrubs, small trees and bulbs
• Creating post holes for fences and supports
• Preparing holes for garden decorations and fixtures

Key specifications

• Drilling diameter: 120 mm
• Overall length (usable drill length): 800 mm
• Maximum drilling depth: up to 80 cm
• Weight: 2.31 kg
• Compatible with: Einhell GP-EA 18/150 Li BL cordless earth auger (as accessory)

How to use

Attach the auger to the compatible Einhell cordless earth auger according to the machine’s mounting instructions, ensuring the connection is secure before operation. Position the tool vertically over the intended drilling point, start the cordless earth auger at low speed to establish the hole, then increase speed as needed and apply steady, even pressure until the desired depth is reached. Withdraw the auger while running slowly to clear soil from the bit, and stop the machine before removing the accessory.

Recommendations

Use appropriate personal protective equipment (gloves, eye protection and sturdy footwear) and check the soil for buried utilities or large stones before drilling. For very compact or rocky ground, consider pre-loosening the soil or using a smaller pilot bit to avoid overloading the machine.