Okasti ključ Gedore 6090640

The Gedore 6090640 combination wrench is manufactured from chrome-plated Gedore vanadium steel (31CrV3) and conforms to DIN 3113 Form A, ISO 3318 and ISO 7738 standards. The ring end is offset 15° from the shaft and the shaft is produced in a girder pattern. Sizes 3 to 5.5 are supplied with a hexagon ring and sizes 6 and above use a UD profile. A noted feature marked with an asterisk is not standardised.

Advantages

This combination wrench offers a standardized form factor for compatibility with metric fasteners, corrosion resistance due to chrome plating, and high strength from 31CrV3 vanadium steel. The 15° ring offset improves access in confined spaces and the girder-pattern shaft increases stiffness while keeping weight low. Available ring profiles by size ensure proper engagement with fastener heads.

Suitable for (tasks / use cases)

Key specifications

How to use

Select the correct wrench size that matches the fastener. Position the open end or ring end on the fastener and apply steady force; the 15° offset helps reach fasteners in tight spots. Use the hexagon ring on sizes 3–5.5 or the UD profile on larger sizes to ensure full engagement. Avoid using the tool as a hammer or prying device to prevent damage to the wrench and the fastener.

Recommendations

Keep the chrome-plated surface clean and dry after use to minimize corrosion. Inspect the wrench regularly for wear or rounding on contacting faces and replace if damage impairs safe engagement. For torque-critical applications use a calibrated torque tool; this combination wrench is intended for manual fastening and general mechanical work.