Gedore okasti ključ 6004070

The Gedore 6004070 combination wrench conforms to DIN 3113 Form B, ISO 3318 and ISO 7738 standards. It features a 10° offset ring relative to the shaft, an extra-strong ring with thin wall construction and a depth of 120 mm and height of 70 mm. Manufactured from Gedore vanadium steel (31CrV3) and chrome-plated, the tool provides durability and access to confined spaces for workshop and maintenance tasks. Sizes 5 and 5.5 mm use a hexagon ring, sizes from 6 mm use a UD profile; the asterisked feature is not standardised.

Advantages

The combination of vanadium steel (31CrV3) and chrome plating gives corrosion resistance and long service life while maintaining strength. The 10° offset ring improves access to fasteners in tight or recessed positions. Thin wall but extra-strong ring design reduces bulk at the jaw area for better reach without sacrificing robustness. Standard-compliant dimensions ensure interchangeability with other tools specified by DIN and ISO where applicable.

Suitable for

Key specifications

How to use

Select the correct size of the Gedore 6004070 combination wrench for the fastener. Position the open end or the offset ring on the nut or bolt head and apply steady turning force; use the offset ring to access fasteners in recessed or narrow locations. Avoid excessive impact loads and ensure the wrench is fully seated on the fastener to reduce risk of rounding. Clean and inspect the tool before use to confirm chrome finish and edges are intact.

Recommendations

For safe and long-lasting performance, store the chrome-plated wrench dry, avoid exposure to corrosive chemicals, and use appropriate torque rather than hammering or prying. Follow applicable DIN/ISO specifications where interchangeability or calibration is required.