Korisnički račun Kontakt
Vaša košarica
DPD i FedEx – datum dostave na stranici proizvoda
Trebate pomoć? Pitajte našeg AI asistenta

XFP transceiver modul BlueOptics 3AL82055AA-BO 10000 Mbit/s

XFP transceiver modul BlueOptics 3AL82055AA-BO 10000 Mbit/s
XFP transceiver modul BlueOptics 3AL82055AA-BO 10000 Mbit/s
XFP transceiver modul BlueOptics 3AL82055AA-BO 10000 Mbit/s
XFP transceiver modul BlueOptics 3AL82055AA-BO 10000 Mbit/s
XFP transceiver modul BlueOptics 3AL82055AA-BO 10000 Mbit/s
XFP transceiver modul BlueOptics 3AL82055AA-BO 10000 Mbit/s
XFP transceiver modul BlueOptics 3AL82055AA-BO 10000 Mbit/s
60 mj.
XFP transceiver modul BlueOptics 3AL82055AA-BO 10000 Mbit/s
XFP transceiver modul BlueOptics 3AL82055AA-BO 10000 Mbit/s
XFP transceiver modul BlueOptics 3AL82055AA-BO 10000 Mbit/s
XFP transceiver modul BlueOptics 3AL82055AA-BO 10000 Mbit/s
XFP transceiver modul BlueOptics 3AL82055AA-BO 10000 Mbit/s
XFP transceiver modul BlueOptics 3AL82055AA-BO 10000 Mbit/s
XFP transceiver modul BlueOptics 3AL82055AA-BO 10000 Mbit/s
124,39 €
PDF
PDF
Dostupnost 10 Šifra proizvoda 1465000 Model 3AL82055AA-BO Jamstvo 5 godina

Dostava i povrat

Očekivana dostava ponedjeljak, 7. prosinca
Naš detaljni sustav za praćenje pošiljaka redovito će Vas obavještavati o statusu
Mogućnosti plaćanja
Platna karticaVisaMastercardPayPalApple PayGoogle PayBankovna uplata

Postavite pitanje – AI asistent odgovara odmah.

Opis

The BlueOptics 3AL82055AA-BO is an XFP fiber optic transceiver module engineered for 10 Gbps network links. Designed for use in fiber-based network infrastructure, this compact silver module provides a standardized XFP interface and supports a maximum data transfer rate of 10000 Mbit/s. With a lightweight construction (approximately 20 g) and an MTBF rating of 1,000,000 hours, it meets common compliance standards including CE, FCC and RoHS for reliable optical connectivity in switches, routers and optical line systems.

Advantages

The module offers a standardized XFP interface that ensures compatibility with a wide range of networking equipment that accepts hot-pluggable optical modules. Its 10 Gbit/s capacity provides sufficient bandwidth for high-throughput links and data center uplinks. The silver housing and compact form factor reduce weight and space usage in chassis-based systems, while the long MTBF figure indicates a design focused on operational longevity and reduced maintenance intervals. Compliance with CE, FCC and RoHS demonstrates conformance to regulatory and environmental requirements.

Suitable for

  • 10 Gbps fiber uplinks between switches and routers
  • Data center interconnects and aggregation links
  • Metro and enterprise optical networks requiring XFP modules
  • Optical equipment maintenance and spares for compatible systems

Key specifications

  • Interface type: XFP
  • Maximum data transfer rate: 10000 Mbit/s (10 Gbps)
  • Module color: Silver
  • Weight: 0.02 kg
  • Mean time between failures (MTBF): 1,000,000 hours
  • Compliance: CE, FCC, RoHS

How to use

Install the BlueOptics XFP transceiver into an appropriate XFP port on compatible network equipment while following standard ESD precautions. Ensure the optical connectors and fibers are clean and correctly matched (single-mode or multimode as required by system design). After insertion, confirm that the host device recognizes the module and that link status indicators show an active connection. Perform any necessary link configuration on the switch or router to enable the 10 Gbit/s interface.

Recommendations

To maintain reliable performance, handle the transceiver by its housing, avoid touching the optical interfaces, and keep dust caps on when not in use. Verify compatibility with the host device's supported XFP modules and confirm fiber type and connector standards before deployment. Regularly inspect and clean fiber connectors to prevent signal degradation.

Ključne značajke
  • 10 Gbps fiber uplinks between switches and routers
  • Data center interconnects and aggregation links
  • Metro and enterprise optical networks requiring XFP modules
  • Optical equipment maintenance and spares for compatible systems
  • Interface type: XFP
  • Maximum data transfer rate: 10000 Mbit/s (10 Gbps)
  • Module color: Silver
  • Weight: 0.02 kg
  • Mean time between failures (MTBF): 1,000,000 hours
  • Compliance: CE, FCC, RoHS

Specifikacije

Specifikacije
Boja proizvoda
Srebrna
Digital Diagnostics Monitoring (DDM)
Da
Duplex sustav
Puno
Ethernet LAN
Da
Form faktor
XFP
Hot-swap
Da
Jednostavna ugradnja
Da
Kompatibilnost s markom
Alcatel
Maksimalna brzina prijenosa podataka
10000 Mbit/s
Maksimalna radna temperatura
70 °C
Maksimalna udaljenost prijenosa
10000 m
Minimalna radna temperatura
0 °C
Optički konektor
LC
Podrška za Hot-Plug
Da
Podržano jednomodno vlakno (SMF)
Da
Potvrde o sukladnosti
RoHS, Federal Communications Commission (FCC), CE
Prosječno vrijeme između kvarova (MTBF)
1000000 h
Standard SFP primopredajnika
LR
Sukladnost s održivošću
Da
Tehnologija kabliranja optičkog Etherneta
10GBASE
Težina
0.02 kg
Valna duljina Rx (maks.)
1310 nm
Valna duljina Tx (maks.)
1310 nm
Vrsta Ethernet sučelja
10 Gigabit Ethernet
Vrsta SFP primopredajnika
Optičko vlakno
Vrsta sučelja
XFP

Letak

Otvori Letak

Dokument

Otvori Dokument

Dokument

Otvori Dokument
Povijest cijene u posljednjih 6 mjeseci
XFP transceiver modul BlueOptics 3AL82055AA-BO 10000 Mbit/s
Trenutačna cijena
124,39 €
Najniža cijena 7 d.
123,14 €
Najviša cijena 7 d.
124,39 €
Promjena 24 h
0,00 €   0%
Promjena 7 d.
+1,26 €   +1%
Promjena 30 d.
0,00 €   0%

Napiši recenziju

Ocjena *
Napomena: HTML se ne prevodi!

Više BLUEOPTICS proizvoda u ovoj kategoriji

12

Popularni proizvodi u ovoj kategoriji

6
Prodavatelj: UAB KUR LT · Gariūnų g. 57-14, LT-02300 Vilnius, Litva · Matični broj 303192950 · PDV ID LT100008198612 · Isporuka iz EU-a (Litva)
WhatsApp
Messenger
Pozdrav, ja sam AI asistent DistriNodea. Mogu Vam pomoći pronaći proizvode, usporediti mogućnosti, izraditi ponude u PDF formatu ili otvoriti zahtjev za podršku.
Sve kategorije