Votronic 6065 StandBy punjač 24 V

The 24V StandBy-Charger from Votronic turns your charge controller into a dual charge controller in no time. It diverts a small amount of current from a charging source to charge a secondary or starter battery.

The VOTRONIC StandBy-Charger 24V (MPN 6065) is used for automatic supplementary charging and charge retention of the starter battery or auxiliary battery when the mains charger, solar charge controller, or generator has only one charging output. The device can be easily integrated into existing systems by simply connecting it between the house and starter battery or house and auxiliary battery. No modification of the existing wiring is necessary.

For example, if the mains charger is in operation and charging the house battery, a small portion of the charging current is used to charge the second battery (starter battery or auxiliary battery) depending on its state of charge.

This charge retention works automatically and is indicated by an increased voltage level of the second battery. Overcharging of the second battery is impossible because the charging voltage is reduced by at least 0.6V and the charging current is limited to 2A.

Important features of the StandBy-Charger 24V, 6065

Enables standard charge controllers to also charge/maintain a second battery.

• Automatic supplementary charging
• Automatic charge retention
• Easy installation, for 24V batteries
• Can be retrofitted at any time without additional effort
• 1x quick start guide