Marka: GEKO
Zaliha: 558
The GEKO G00503 is a keyed drill chuck with a clamping range of 1.5-13 mm and a B16 taper, designed for use with small and large hand drills.The jaws ..
5,26 €
Bez PDV-a:4,21 €
Marka: GEKO
Zaliha: 545
The GEKO G00532 is a keyed drill chuck with a clamping range of 1.5-10 mm and a B12 taper, designed for use with small hand drills.The jaws are tighte..
4,60 €
Bez PDV-a:3,68 €
Marka: GEKO
Zaliha: 1568
The GEKO G00510 is a keyless drill chuck with a clamping range of 2-13 mm and a 1/2" thread, designed for use with small and large hand drills.The key..
5,70 €
Bez PDV-a:4,56 €
Marka: GEKO
Zaliha: 1788
The GEKO G00521 is a keyless drill chuck with a clamping range of 2-13 mm and a 1/2"-20 UNF, designed for use with small and large hand drills.The jaw..
10,60 €
Bez PDV-a:8,48 €
Marka: GEKO
Zaliha: 449
The GEKO G00541 is a keyed drill chuck with a clamping range of 3-16 mm and a B16 taper, designed for use with small hand drills.The jaws are tightene..
8,79 €
Bez PDV-a:7,03 €
Marka: GEKO
Zaliha: 457
The GEKO G00550 is a keyed drill chuck with a clamping range of 5-20 mm and a B22 taper, designed for use with hand drills.The jaws are tightened with..
23,66 €
Bez PDV-a:18,92 €
Marka: GEKO
Zaliha: 447
The GEKO G00530 is a keyed drill chuck with a clamping range of 1.5-10 mm and a 3/8" thread, designed for use with small hand drills.The jaws are tigh..
4,73 €
Bez PDV-a:3,78 €
Marka: GEKO
Zaliha: 813
The GEKO G00531 is a keyed drill chuck with a clamping range of 1.5-10 mm and a 1/2" thread, designed for use with small hand drills.The jaws are tigh..
4,83 €
Bez PDV-a:3,86 €
Marka: GEKO
Zaliha: 980
The GEKO G00501 is a keyed drill chuck with a clamping range of 1.5-13 mm and a M12x1.25 thread, designed for use with small and large hand drills.The..
5,52 €
Bez PDV-a:4,41 €
Marka: GEKO
Zaliha: 304
The GEKO G00504 is a keyed drill chuck with a clamping range of 1.5-13 mm and a 3/8" thread, designed for use with small and large hand drills.The jaw..
5,31 €
Bez PDV-a:4,24 €
Marka: GEKO
Zaliha: 588
The GEKO G00547 is a keyed drill chuck with a clamping range of 3-16 mm and a 5/8" thread, designed for use with small hand drills.The jaws are tighte..
8,70 €
Bez PDV-a:6,96 €
Marka: GEKO
Zaliha: 423
The GEKO G00551 is a keyless drill chuck with a clamping range of 5-20 mm and a B22 taper, designed for use with small and large hand drills.The jaws ..
28,32 €
Bez PDV-a:22,66 €
Marka: GEKO
Zaliha: 2263
The GEKO G00500 is a keyed drill chuck with a clamping range of 1.5-13 mm and a 1/2" thread, designed for use with small and large hand drills.The jaw..
4,95 €
Bez PDV-a:3,96 €
Marka: GEKO
Zaliha: 672
The GEKO G00548 is a keyless drill chuck with a clamping range of 1-16 mm and a B18 taper, designed for use with small and large hand drills.The jaws ..
22,29 €
Bez PDV-a:17,83 €
Marka: GEKO
Zaliha: 479
The GEKO G00534 is a keyless drill chuck with a clamping range of 1.5-10 mm and a 3/8" thread, designed for use with small hand drills.The keyless sel..
4,77 €
Bez PDV-a:3,82 €
Prikazano 1 – 15 od ukupno 15 (broj stranica: 1)
Alati, građevina i radionica
Stezne glave s ključem i brzostezne, s navojem ili konusom
Zamjenske stezne glave za bušilice i stalke za bušilice: glave s ključem raspona 10, 13 i 16 mm, brzostezne glave poput 2-13 te PROFI glave do 1-16 mm i 5-20 s konusom B22.
15 proizvodaStezne glavePutem službenih distributera
Kako odabrati
Raspon stezanja
Prvi broj u nazivu najveći je promjer drška svrdla koji glava može stegnuti: 10, 13 ili 16 mm. Inačice s rasponom navode obje vrijednosti, npr. 2-13, 1-16 mm ili 5-20.
Navojni prihvat
Glave označene s 3/8, 1/2 ili 5/8 navijaju se na vreteno bušilice s navojem. Najprije provjerite navoj bušilice jer glava 3/8 ne odgovara vretenu 1/2.
Konusni prihvat
Glave označene s B12, B16, B18 ili B22 nasađuju se na konusni trn kakav imaju stalci za bušilice i stupne bušilice. Broj B glave mora odgovarati trnu.
S ključem ili brzostezna
Glave s ključem stežu se ključem i čvrsto drže svrdlo. Brzostezne se stežu rukom pa je zamjena svrdla brža. Postoji i glava 2-13 1/2 s metalnim kućištem.
Što ćete ovdje pronaći
Provjerite prije kupnje: U nazivu proizvoda provjerite dvije stvari: raspon u mm i prihvat, navoj (3/8, 1/2, 5/8) ili konus (B12, B16, B18, B22). Oboje mora odgovarati vašoj bušilici ili stalku.
Često postavljana pitanja
Što znači 13-1/2 u nazivu?
13 je najveći raspon u mm, a 1/2 je navoj kojim se glava navija na vreteno bušilice.
S ključem ili brzostezna: koju odabrati?
Glava s ključem jače steže i prikladna je za zahtjevno bušenje. Brzostezna je brža kad često mijenjate svrdla.
Koja glava odgovara stalku za bušilicu?
Stalci za bušilice obično imaju konusni trn. Odaberite glavu s istim brojem B kao trn, npr. B16, B18 ili B22.