Štedna žarulja Ultron 138119 10 W E27 3000 K

The Ultron 138119 energy-saving lamp is a 10 W LED bulb with an E27 fitting that delivers 810 lumens of warm white light at 3000 K. Designed for general indoor illumination, the lamp produces a soft, comfortable light with a wide 130° beam angle and a long rated life of 25,000 hours, offering stable performance for residential and light-commercial spaces. It combines low power consumption with consistent luminous output to replace higher-wattage incandescent lamps while fitting standard E27 sockets.

Advantages

The lamp provides efficient light output relative to its 10 W power consumption and a long operational lifespan of 25,000 hours, reducing the frequency of replacements. Its warm 3000 K color temperature creates a pleasant atmosphere while the 130° beam angle ensures broad coverage. The standard E27 fitting enables easy installation in most household and commercial fixtures. The bulb’s rated luminous flux of 810 lm supports general lighting needs with predictable brightness.

Suitable for

• General room lighting in living rooms and bedrooms
• Table and floor lamps with E27 sockets
• Kitchen and dining area fixtures requiring warm white light
• Corridors, hallways and common spaces in homes or small offices

Key specifications

• Fitting: E27
• Power consumption: 10 W
• Luminous flux: 810 lm
• Colour temperature: 3000 K (warm white)
• Beam angle: 130°
• Rated lifetime: 25,000 hours
• Energy efficiency class: F

How to use

Ensure the fixture is switched off and cool before installing the Ultron 138119 lamp. Screw the bulb into a compatible E27 socket until secure, then switch the power on. Use this lamp in indoor fixtures designed for an E27 fitting and within the specified supply voltage of the installation. Replace the bulb after its useful life as indicated by reduced light output or end of rated hours.

Recommendations

For best performance, use the lamp in fixtures that allow adequate ventilation to avoid excessive heat buildup. Avoid using the bulb in fully enclosed luminaires unless the fixture is rated for use with LED lamps and accommodates heat dissipation. Clean the bulb with a dry cloth when the power is off and the bulb is cool. Dispose of the lamp according to local regulations for electronic waste.