SSD disk Transcend 256GB M.2 PCIe TS256GMTE110S

Transcend PCIe SSD 110S uses the PCI Express Gen3 x4 interface and follows the NVMe 1.3 standard to deliver next-generation performance for demanding tasks. Built with 3D NAND flash memory, the PCIe SSD 110S targets high-end applications such as digital audio/video production, gaming, and enterprise workloads that require sustained transfer speeds and reliable operation.

Advantages

The drive provides high sustained read/write performance (up to 1,700 MB/s read and 1,400 MB/s write measured with CrystalDiskMark v5.0.2), low latency access through the NVMe protocol, and improved density and endurance thanks to 3D NAND architecture. It also incorporates LDPC error-correction and dynamic thermal throttling to enhance data integrity and long-term stability.

Key specifications

• Interface: PCI Express Gen3 x4 (NVMe 1.3)
• Sequential read speed: up to 1,700 MB/s (CrystalDiskMark v5.0.2)
• Sequential write speed: up to 1,400 MB/s (CrystalDiskMark v5.0.2)
• Flash type: 3D NAND
• Error correction: LDPC (Low-Density Parity Check)
• Features: NVMe protocol, TRIM support, dynamic thermal throttling

How to use

Install the PCIe SSD 110S into a compatible M.2 or PCIe slot according to your system documentation and ensure your motherboard and operating system support NVMe over PCIe Gen3 x4. After physical installation, initialize and format the drive in your OS if required. For best performance, enable TRIM and update drive firmware using Transcend's SSD Scope utility. Follow the motherboard manual for secure mounting and static-discharge precautions.

Recommendations

Use the SSD in systems that support NVMe and PCIe Gen3 x4 to achieve the stated performance. Regularly monitor drive health and firmware updates with Transcend SSD Scope and back up important data to prevent data loss.