SFP+ transceiver modul BlueOptics BO55J27640DIN 10000 Mbit/s

The BlueOptics BO55J27640DIN SFP+ transceiver module is a compact fiber optic interface designed for 10 Gigabit Ethernet links. Supporting a maximum data transfer rate of 10000 Mbit/s and a maximum transfer distance of 40000 m, this silver-colored SFP+ module fits standard SFP+ ports and provides a space-efficient solution for high-speed uplinks and fiber connections. The module is lightweight (0.02 kg) and offers a high mean time between failures (MTBF) of 3,000,000 hours. It complies with CE, FCC and RoHS directives, making it suitable for modern network deployments that require standards compliance and long-term reliability.

Advantages

The module supports 10 Gigabit Ethernet operation with an LC fiber optic connector, enabling reliable single-mode fiber links up to the specified distance. Its SFP+ form factor provides hot-pluggable installation and compatibility with a wide range of switches, routers and media converters that accept SFP+ modules. The low weight and compact size make it suitable for dense rack deployments, while the long MTBF indicates extended operational life and reduced maintenance intervals.

Suitable for

Key specifications

How to use

Power down the host device or follow the vendor's hot-swap procedure, then insert the BlueOptics BO55J27640DIN into an available SFP+ slot until it seats firmly. Connect LC-terminated single-mode fiber cables to the transceiver's LC connector, observing correct transmit/receive orientation. Configure the network device as required for 10 Gigabit Ethernet operation and verify link status through the device management interface. If hot-plugging is supported, insert or remove the module while the host device remains powered following the manufacturer's guidance.

Recommendations

Use single-mode LC fiber optic cables rated for long-reach transmission and ensure proper fiber cleanliness to maintain link quality. Verify compatibility with the host device's SFP+ slot and firmware; consult the device vendor for recommended module compatibility lists. Store unused modules in protective packaging to prevent contamination and mechanical damage.