SFP+ transceiver modul BlueOptics AA1403016-E6-NT-BO 10000 Mbit/s

The BlueOptics AA1403016-E6-NT-BO is an SFP+ fiber optic transceiver module designed for 10 Gbit/s network links. It supports a maximum data transfer rate of 10000 Mbit/s and is intended for use in compatible switches, routers and media converters that accept SFP+ modules. The module is finished in a silver housing, has a compact form factor and a lightweight construction of approximately 20 g. It meets CE, FCC and RoHS directives and is specified with an MTBF of 1,000,000 hours.

Advantages

The transceiver provides a standard SFP+ interface for straightforward hot-pluggable installation and interoperability with equipment that follows SFP+ specifications. Its 10 Gbit/s capability supports high-throughput links and data center or enterprise backhaul connections. Compliance with CE, FCC and RoHS ensures regulatory conformity and environmental safety, while the specified MTBF indicates long-term reliability in continuous-operation environments.

Suitable for

• 10 Gbit/s uplinks in switches and routers
• Server and storage network connections
• Media converters and optical line modules
• High-density network deployments and data center interconnects

Key specifications

• Interface type: SFP+
• Maximum data transfer rate: 10000 Mbit/s (10 Gbit/s)
• Housing colour: Silver
• Weight: 0.02 kg (approximately 20 g)
• Mean time between failures (MTBF): 1,000,000 hours
• Standards: CE, FCC, RoHS compliant

How to use

Insert the BlueOptics SFP+ module into an SFP+ cage or port on a compatible network device while the device is powered on or following the vendor’s hot-swap procedure. Ensure the transceiver is seated securely until it latches. Connect the appropriate fiber optic cable and verify link status using the host device management interface or LED indicators. If required, configure the network device’s port settings (speed, duplex, and transceiver settings) according to the equipment documentation.

Recommendations

Use this module with fiber types and patch cords that match the transceiver’s optical specifications and the host device requirements. Confirm compatibility with the target switch or router model before deployment and follow ESD precautions during handling. For stable operation, maintain clean fiber connectors and avoid excessive bending of fiber cables.