SFP+ transceiver modul BlueOptics 3HE09328AA-BO 10000 Mbit/s

The BlueOptics 3HE09328AA-BO SFP+ transceiver module provides a compact, industry-standard solution for 10 Gbit/s fiber-optic network links. Designed in the SFP+ form factor, this silver-coloured module supports a maximum data transfer rate of 10000 Mbit/s and is intended for insertion into compatible SFP+ ports on switches, routers and network interface cards. With a specified mean time between failures (MTBF) of 1,000,000 hours and compliance with CE, FCC and RoHS directives, it is suitable for professional network environments where space efficiency and signal integrity are required.

Advantages

The module’s SFP+ form factor ensures compatibility with a wide range of modern network devices while keeping rack and module density high. Its lightweight construction (approximately 20 g) and silver finish provide easy handling and straightforward identification during installation. Certification to CE, FCC and RoHS standards confirms regulatory compliance and material safety for regulated deployments. The high MTBF rating indicates long operational life under normal conditions, reducing the need for frequent replacements.

Suitable for

• 10 Gbit/s uplinks between switches and aggregation points
• High-speed server connections and data center fabric links
• Campus and enterprise fiber backbone segments
• Network equipment requiring SFP+ small-form-factor transceivers

Key specifications

• Form factor: SFP+
• Maximum data transfer rate: 10000 Mbit/s
• Colour: Silver
• Weight: 0.02 kg
• MTBF: 1,000,000 hours
• Standards compliance: CE, FCC, RoHS

How to use

Before installation, power down or follow the hot-swap procedure recommended by the network equipment vendor. Insert the SFP+ transceiver into the SFP+ slot until it seats securely and the latch engages. Connect the appropriate fiber optic cable to the module’s port, ensuring correct connector type and polarity for the link. After connection, verify link status and speed in your device’s network management interface and perform any required configuration for the interface and VLANs.

Recommendations

Use compatible single-mode or multimode fiber and connectors as specified by the connected equipment. Avoid touching the optical connector end faces; keep protective caps on until ready to connect. Store unused modules in antistatic packaging and operate within the temperature and environmental ranges specified by the host device to ensure performance and longevity.