SFP+ transceiver modul BlueOptics 3FE62600AA-BO 10000 Mbit/s

The BlueOptics 3FE62600AA-BO SFP+ transceiver module is a compact fiber optic interface designed for high-speed data communication. Supporting a maximum transfer rate of 10000 Mbit/s and implemented in a metal housing, this SFP+ module is intended for single-mode optical links where a small-form-factor pluggable transceiver is required. The module's rugged silver metal housing and low weight of 20 g make it suitable for rack-mounted and modular networking equipment that accept SFP+ optics.

Advantages

The BlueOptics 3FE62600AA-BO provides 10 Gbit/s class performance in an industry-standard SFP+ form factor, enabling interoperability with equipment that supports SFP+ optics. The metal housing offers mechanical durability and thermal dissipation appropriate for continuous operation. With a reported mean time between failures (MTBF) of 1,000,000 hours, the module is specified for long operational life. The product is compatible with LC duplex connections and is designed for single-mode fiber links, reducing susceptibility to electromagnetic interference compared with copper alternatives.

Suitable for

• 10 Gbit/s Ethernet uplinks and server interconnects
• Long-reach single-mode fiber links in data centers and campus networks
• Integration into switches, routers and storage systems with SFP+ ports
• Environments where compact, hot-pluggable fiber optics are required

Key specifications

• Interface type: SFP+
• Maximum data transfer rate: 10000 Mbit/s (10 Gbit/s)
• Connector: LC duplex (single-mode fiber)
• Housing: metal, silver color
• Weight: approximately 0.02 kg (20 g)
• Mean time between failures (MTBF): 1,000,000 hours

How to use

Install the module into an SFP+ slot of a compatible switch, router or storage device while the host system is powered according to the equipment manufacturer's hot-swap guidelines. Connect single-mode LC duplex fiber patch cords to the transmit and receive ports, ensuring correct polarity. Configure the host interface for 10 Gbit/s operation as required by your network equipment and verify link status through the system management interface. If the host supports digital diagnostics monitoring (DDM/DOM), enable and monitor available parameters such as supply voltage and optical power as supported by the platform.

Recommendations

Use quality single-mode LC duplex patch cords and appropriate patch panels to achieve optimal range and signal quality. Verify that the network equipment firmware supports third-party SFP+ modules and, if available, enable digital diagnostics monitoring to assist with link troubleshooting and preventive maintenance.