SFP transceiver modul BlueOptics 3FE27626AA-BO 155 Mbit/s

The BlueOptics 3FE27626AA-BO 155 Mbit/s SFP transceiver module is a compact optical interface designed for fiber-based data links with a maximum data transfer rate of 155 Mbit/s. Housed in a silver-metal SFP enclosure, the module follows the small form-factor pluggable specification and is intended for installation in compatible networking devices to provide a reliable single-channel fiber connection. The product specification includes a high mean time between failures (MTBF), reflecting suitability for continuous operation in data communication environments.

Advantages

This SFP transceiver offers a compact, industry-standard form factor that simplifies upgrades and replacements in modular network equipment. The specified 155 Mbit/s data rate supports legacy synchronous and asynchronous transmission applications, while the metal casing provides mechanical robustness and electromagnetic shielding. A long MTBF contributes to lower maintenance frequency and predictable operational availability in point-to-point or channelized fiber links.

Suitable for

• Legacy WAN and MAN links with 155 Mbit/s bandwidth requirements
• Point-to-point fiber connections between switches or media converters
• Modular network equipment requiring SFP optical uplink modules
• Environments where a compact, hot-pluggable optical interface is needed

Key specifications

• Interface type: SFP (small form-factor pluggable)
• Maximum data transfer rate: 155 Mbit/s
• Housing colour and finish: silver metal enclosure
• Form factor: hot-pluggable SFP module suitable for standard SFP ports
• Reliability indicator: high MTBF suitable for continuous operation

How to use

Insert the transceiver into a compatible SFP port on your switch, router or media converter until it seats and the device confirms link presence. Connect the appropriate fiber cable to the optical interface following the device manufacturer’s recommendations for connector type and polarity. Configure port settings on the host device as required for the 155 Mbit/s link; confirm optical link status and monitor signal levels through the network equipment management interface.

Recommendations

Ensure compatibility of connector type and fiber mode with the remote equipment before installation, and follow ESD precautions when handling the module. Use dust caps when the module is not connected and verify port settings to match the intended data rate to maintain stable link performance.