Set vijaka i tipli Fischer 45686

The Fischer 45686 screw anchor and wall plug kit contains 20 pieces designed for secure fastening in brick and concrete. Each anchor requires a drill hole diameter of 10 mm and a minimum embedment depth of 14 mm, providing a reliable hold for fixtures and fittings. The kit is supplied in a compact box for orderly storage and easy transport, suitable for both professional tradespeople and DIY users working on light to medium load applications.

Advantages

The kit combines anchors and matching screws to simplify installation and reduce the need to match components. Anchors are engineered for masonry substrates, delivering consistent expansion and holding performance in brick and concrete. The compact box keeps parts organised on-site and at home, while the standard drill diameter and depth requirements make planning and preparation straightforward.

Suitable for

• Fixing shelves, cabinets and light fittings to brick or concrete walls
• Mounting handrails, brackets and small supports in masonry
• Interior and exterior installations where masonry anchors are required
• DIY repair, renovation and light construction tasks

Key specifications

• Contents: 20 anchors with matching screws
• Compatible substrates: brick, concrete
• Required drill hole diameter: 10 mm
• Minimum embedment depth: 14 mm
• Packaging: compact storage box

How to use

Mark the fixing positions on the masonry surface and drill holes with a 10 mm masonry drill to the required depth. Clean out dust from the hole before inserting the wall plug; insert the anchor flush with the surface and then drive the matching screw until the fixture is secure. Ensure the embedment depth of at least 14 mm is achieved for each anchor and verify load and spacing requirements for the intended application.

Recommendations

Use a proper masonry drill bit and a hammer drill when working with concrete or dense brick. For heavy loads or critical fixings, consult relevant load tables and, if necessary, choose an anchor system rated for higher loads. Store the kit in a dry place and separate different anchor sizes to avoid installation errors.