SATA kabel DeLOCK 82674 0,1 m crveni

The DeLOCK 82674 SATA cable is a 0.1 m internal data cable with male SATA connectors on both ends and a red jacket. It complies with the latest SATA standard and supports data transfer rates up to 6 Gb/s while remaining backward compatible with older SATA versions. Its short length makes it suitable for compact builds and tight internal connections between devices such as hard drives, controller cards and flash storage.

Advantages

This SATA cable offers support for SATA 6 Gb/s transfers, backward compatibility with earlier SATA generations, and a compact 0.1 m length that reduces cable clutter in confined spaces. The cable’s red colour helps with internal cable identification and routing.

Suitable for

• Connecting internal HDDs to a motherboard or controller card
• Linking SATA flash storage or SSDs in compact cases
• Short internal connections where a 0.1 m cable is sufficient

Key specifications

• Brand: DELOCK
• Model / MPN: 82674
• Cable type: SATA to SATA, male–male
• Cable length: 0.1 m
• Data transfer rate: up to 6 Gb/s (SATA III), backward compatible
• Colour: Red

How to use

Connect one male SATA connector to the SATA port on the motherboard or controller card and the other connector to the SATA device (HDD, SSD or SATA flash module). Ensure both connectors are fully seated and the cable routing does not stress the connectors. Power the system after connections are secured and verify the device is detected by the operating system or BIOS.

Recommendations

If using in tight spaces, route the cable to avoid sharp bends and keep it clear of moving parts; when connecting to older SATA ports, note that transfer speed will be limited to the older interface’s maximum.