SATA II kabel Equip 111800, 0,5 m

The Equip SATA II Cable (0.5 m) is a red internal SATA cable with 7-pin SATA connectors on both ends, designed for reliable data transfer between SATA devices such as hard drives and SSDs. Constructed with gold flash contacts and aluminium shielding, the cable is intended to ensure stable, low-error signal transmission in tight internal PC spaces.

Advantages

The cable's gold flash contacts improve contact reliability and corrosion resistance, while the aluminium shielding reduces electromagnetic interference for clearer signal integrity. Its 0.5 m length and compact 7-pin SATA connectors make it suitable for cramped PC cases, and the durable build supports long-term internal connections.

Suitable for

• Connecting internal SATA hard drives and SSDs
• Motherboard-to-storage device connections in desktop PCs
• Upgrades or replacements in compact or standard computer cases

Key specifications

• Cable type: SATA II
• Cable length: 0.5 m
• Connector 1: SATA 7-pin
• Connector 2: SATA 7-pin
• Product colour: Red
• Weight: 0.0166 kg
• MPN: 111800
• EAN: 4015867103630

How to use

Power down the computer and disconnect it from the mains before installation. Locate an available SATA port on the motherboard and the SATA data connector on the drive. Align the 7-pin SATA connector with the drive's socket and firmly insert until it seats. Connect the other end to the motherboard's SATA port. Restore power and verify the drive is detected in BIOS or the operating system.

Recommendations

For optimal performance, pair the SATA II cable with compatible SATA devices and avoid excessive bending or stress near the connectors. Keep the cable clear of fans and sharp edges inside the case to prevent physical damage.