QNAP CAB-SAS10M-8644 kabel SFF-8644 1m

The QNAP CAB-SAS10M-8644 is a 1 m SFF-8644 cable designed for reliable SAS connections between storage devices and servers. Featuring SFF-8644 connectors on both ends, this QNAP cable supports high-speed data transfer and is intended for data-intensive environments where stable connectivity and consistent performance are required.

Advantages

This 1-meter SFF-8644 cable offers a compact length suitable for rack or chassis installations while minimizing signal loss. The use of matched SFF-8644 connectors on both ends ensures compatibility with standard SAS ports and helps maintain stable throughput for storage arrays and RAID configurations. The cable is produced under QNAP’s design standards to integrate with enterprise and prosumer storage setups.

Suitable for

• Connecting SAS storage enclosures to servers or host bus adapters
• Linking RAID controllers to drive backplanes
• Short to medium internal or rack-mounted cable runs in data centers

Key specifications

• Connector type: SFF-8644 to SFF-8644
• Length: 1 m
• Brand: QNAP
• Manufacturer part number (MPN): CAB-SAS10M-8644

How to use

Ensure both devices are powered down or follow hot-swap guidelines of your hardware. Align the SFF-8644 connector with the corresponding SAS port and insert firmly until the connector seats. Route the cable to avoid sharp bends and secure it within the chassis or rack to prevent strain. After connection, power devices on and verify that the host recognizes the attached storage.

Recommendations

Use this QNAP SFF-8644 1 m cable for short internal or rack-mounted connections; avoid exceeding recommended bend radii and inspect connectors for debris before installation to maintain reliable SAS performance.