Upravljačka jedinica Pylontech SC0500-40S za H48050 Powercube X1

• Protection against overcharging and temperature fluctuations
• Connection to Pylontech battery modules H48050/H48074
• Communication via Modbus RTU/CAN

The SC0500-40S from Pylontech acts as the central control and monitoring unit for the high-voltage battery system Powercube X1 V2. The integrated battery management system (BMS) enables seamless communication with compatible inverters. 2-10 Pylontech H48050/H48074 battery modules can be connected to the BMS. These modules are connected in series to form a battery tower in combination with a control unit. If several towers are connected in parallel, each tower requires its own control unit.

The long-proven communication protocol from Pylontech is directly supported by a large number of inverters.

• Deep discharge and overcharge
• Overvoltage during charging
• Excessive currents during charging and discharging
• Over- and under-temperature
• Short circuit and reverse polarity
• The Powercube X1 energy storage system

The Powercube X1 series from Pylontech is a high-voltage battery system of the latest generation. The complete system is flexibly usable and expandable if required. One BMS control unit is required per Powercube X1 tower for operation. Caution: The Powercube has no soft-start circuit.

• Flexible expansion

The Powercube battery system from Pylontech offers high flexibility through its expandable configuration options, which range from 4.8 kWh to 24 kWh. Installation and expansion of the system is simple and straightforward thanks to the modular design and the use of cables.

Monitoring functions of the control unit

• Operating record
• Current
• Voltage
• Temperature
• State of charge
• 1x Pylontech SC0500-40S BMS control unit