Polymaker PolyMax PC filament 1,75 mm, 0,75 kg, boja Red (PC02010)

Polymaker PolyMax Tough PC stands apart from standard polycarbonate filaments by combining high impact strength with ease of printing. It delivers the toughness and heat resistance expected from PC, while remaining reliable on a wide range of printers.

Highlights

• Material: Polycarbonate (PC)
• Diameter: 1.75 mm with ±0.05 mm tolerance
• Net weight: 750 g
• Colour: Black
• High impact resistance: 25 kJ/m² notched Izod
• Heat deflection temperature: 110 °C at 0.45 MPa

In daily use

PolyMax Tough PC prints at 250–270 °C with a bed temperature of 90–105 °C. A cooling fan should be turned off. Recommended build surfaces include BuildTak, PEI, or glass with glue stick/PVA. The filament is vacuum-sealed with desiccant and wound on a recycled cardboard spool.

Full specifications

• Tensile strength: 60 MPa
• Elongation at break: 10%
• Density: 1.18 g/cm³
• Recommended print speed: 30–60 mm/s
• Spool material: Recycled cardboard

Final note

PolyMax Tough PC is suited for functional prototypes, mechanical parts, and jigs & fixtures where durability matters.