Patch kabel helos 205244 RJ-45 15 m – mrežni patch kabel

Patch cable helos 205244 RJ-45 15 m is a fixed-length Ethernet patch lead intended for establishing copper network connections between routers, switches, computers and other Ethernet-enabled devices. With a 15 metre length and standard RJ-45 connectors, this cable provides a direct physical link for data and internet traffic in home and small office environments. The construction is designed for straightforward installation and reliable signal transmission over a single twisted-pair copper link terminated with 8P8C connectors.

Advantages

The helos 205244 cable delivers a ready-to-use, pre-terminated solution that eliminates the need for field crimping or custom assembly. A 15 m length reduces the need for intermediate patch panels or additional extenders in medium-sized rooms, while standard RJ-45 connectors ensure compatibility with common Ethernet ports. The cable offers consistent electrical performance for typical Ethernet use, providing stable connectivity for data transfer and internet access.

Suitable for

• Connecting desktop computers to switches or routers
• Linking network switches within office racks or on desks
• Setting up home network connections for smart TVs, game consoles and media players
• Temporary or permanent wiring in small office and home office (SOHO) environments

Key specifications

• Cable length: 15 m
• Connector type: RJ-45 (8P8C) on both ends
• Cable type: shielded or unshielded twisted pair (as supplied by manufacturer)
• Conductor material: copper
• Intended use: Ethernet network patching for data and internet

How to use

Insert one RJ-45 connector into the Ethernet port of your router, switch or modem and the other connector into the Ethernet port of the target device (computer, NAS, smart TV or game console). Ensure both connectors click into place to confirm a secure mechanical and electrical connection. For best results, route the cable to avoid sharp bends, kinks and sources of electromagnetic interference such as unshielded power lines or large motors.

Recommendations

Use the 15 m length to bridge distances where a short cable is insufficient but a long run is not required. Avoid running the cable parallel and in close proximity to high-voltage power cables to minimize interference. If connecting devices across structured cabling or long backbone segments, verify link speed and duplex settings after installation to ensure optimal performance.