Patch kabel Equip Cat.6A RJ-45 U/UTP 2m crni

The Equip Cat.6A U/UTP Patch Cable is a 2 m black network cable with RJ-45 connectors on both ends. Designed for 10GBase-T networks, it supports data transfer rates up to 10000 Mbit/s and is manufactured to meet industry standards for reliable performance. The U/UTP construction reduces external interference to maintain signal integrity in demanding network environments.

Advantages

This Cat.6A patch cable provides higher bandwidth and an improved signal-to-noise margin compared with lower-category cables, enabling stable, low-error transmission for 10G applications. The molded RJ-45 connectors and standardized construction ensure consistent plug-and-play compatibility with network equipment.

Suitable for

• 10GBase-T switches and routers
• Server connections in data racks
• Office and home network wiring
• High-bandwidth applications such as large file transfers and streaming

Key specifications

• Cable length: 2 m
• Connectors: RJ-45 — both ends
• Category: Cat.6A, U/UTP
• Rated speed: up to 10000 Mbit/s
• Cabling technology: 10GBase-T
• Colour: Black
• Weight: 0.054 kg
• Brand: EQUIP, MPN: 603053, EAN: 4015867230343

How to use

Connect one RJ-45 connector to a network device (switch, router or network card) and the other connector to the corresponding port on the destination device. Ensure connectors are fully inserted until the latch clicks. Route the cable to avoid sharp bends and sources of strong electromagnetic interference for optimal performance.

Recommendations

For best results in 10G networks, use Cat.6A-rated ports and limit cable runs according to standard installation practices. Avoid running the cable parallel to power lines and maintain appropriate bend radius. Periodically inspect connectors for damage and replace the cable if signal errors occur.