Optički transceiver modul BlueOptics TRX100077-BO XFP aluminij

The BlueOptics TRX100077-BO XFP Aluminium is a fiber optic XFP transceiver module designed for 10G high-speed data links over multi-mode fiber. The module comes in an aluminium housing, uses an LC duplex connector, and supports 10GBASE-SR operation with 850 nm transmit and receive wavelengths. With a compact XFP interface and a lightweight design (approximately 20 g), this transceiver is suitable for use in switches, routers, storage systems and other network devices that accept XFP modules and support 10GBASE-SR optics.

Advantages

The module follows the XFP MSA electrical, mechanical and functional specifications to ensure interoperability and straightforward integration into compatible hardware platforms. It supports Digital Diagnostic Monitoring (DDM/DOM) functions for real-time monitoring of supply voltage, laser bias current, transmit output power, receive input power and temperature. Built with high-quality optical and electronic components, the transceiver is intended to provide stable optical performance over typical short-range links and a long operational lifetime.

Suitable for

Key specifications

How to use

Install the BlueOptics TRX100077-BO XFP module into an empty XFP slot on a compatible network device following the device manufacturer’s hot-plug procedures. Connect LC duplex multimode fiber patch cords to the module’s LC ports, observing correct transmit/receive alignment. Ensure the host device supports 10GBASE-SR optics and, if required, enable or verify DDM/DOM support in the host system to read diagnostic parameters. Power up the system and verify link status via the host device management interface or LEDs.

Recommendations

Use OM3/OM4 multimode fiber patch cords and quality LC duplex connectors to achieve optimal reach and signal integrity. Confirm compatibility with the target hardware platform before deployment and consider requesting a test sample for verification in critical environments. Avoid excessive bending or stress on fiber cables and follow ESD precautions when handling the transceiver.