Optički transceiver modul BlueOptics AA1403170-E6-BO 10000 Mbit/s SFP+

The BlueOptics AA1403170-E6-BO is a fiber optic transceiver module engineered for reliable high-speed connectivity. Designed with an SFP+ interface, this module supports data transfer rates up to 10000 Mbit/s and operates over multimode or single-mode fiber links depending on network design. Compact and lightweight at approximately 20 g, the transceiver uses an LC fiber connector and a silver housing to integrate into standard networking equipment for switches, routers and media converters.

Advantages

This transceiver provides a standardized SFP+ form factor for straightforward compatibility with devices that accept SFP+ modules. It supports long-range data transmission up to 10000 m, enabling connections between distant network nodes without intermediate electrical conversion. The module’s low weight and compact size simplify handling and installation, while the LC connector offers a widely used physical interface for fiber cabling systems.

Suitable for

• Upgrading switch or router ports to 10 Gbps fiber links
• Extending network backbones across buildings or campus environments
• Integrating into media converters and fiber uplink modules
• Replacing failed or incompatible SFP+ transceivers in data centers

Key specifications

• Maximum data transfer rate: 10000 Mbit/s
• Maximum transfer distance: 10000 m
• Interface: SFP+
• Fiber optic connector type: LC
• Product colour: Silver
• Weight: 0.02 kg

How to use

Before installation, verify compatibility of the target device with SFP+ transceivers and ensure the correct fiber type and cable polarity. Insert the module into an available SFP+ slot until it latches, then connect LC-terminated fiber patch cords to the module’s ports. Power on the host device and check link indicators and device diagnostics to confirm an active connection. Follow your equipment vendor’s procedures for hot-swap insertion or removal if supported to avoid disrupting traffic.

Recommendations

Handle the transceiver by its housing and avoid touching the optical interfaces; keep protective dust caps on when not connected. Use appropriate cleaning tools for LC connectors to maintain signal quality. Match the module to compatible fiber types and transceiver settings in the host device to ensure expected performance.