Mikrofon DeLOCK 66882

The DeLOCK 66882 USB condenser microphone is a wired black microphone designed for high-quality voice and vocal recording. It features a 16 mm condenser capsule with a cardioid (unidirectional) polar pattern, a sensitivity of -38 dB, a frequency response of 30–16000 Hz, a signal-to-noise ratio of 70 dB and a sample rate up to 24 bit / 192 kHz. The microphone connects via USB and includes a 2.5 m cable and a stable metal tripod stand with rubber feet.

Advantages

The cardioid polar pattern and high sensitivity enable clear capture of the sound source while reducing background noise. A 24 bit / 192 kHz sampling rate allows recordings at near-studio quality. USB Plug & Play operation requires no driver installation and is compatible with common operating systems including Windows, macOS, Chrome OS and Linux. The metal base with rubber feet provides a stable, non-slip stand and the foldable tripod table stand is easy to transport.

Suitable for

• Streaming
• Podcasting
• Gaming voice chat
• Video meetings and remote conferencing
• Home studio vocal and voice recording

Key specifications

• Microphone type: USB wired condenser microphone
• Capsule size: 16 mm condenser
• Polar pattern: Cardioid (unidirectional)
• Sensitivity: -38 dB
• Frequency response: 30–16000 Hz
• Sample rate / resolution: 24 bit / 192 kHz
• Signal-to-noise ratio: 70 dB
• Device interface: USB
• Cable length: 2.5 m
• Colour: Black

How to use

Connect the microphone to a computer using the included USB cable. The DeLOCK 66882 is Plug & Play, so no additional driver installation is required on Windows, macOS, Chrome OS or Linux. Position the microphone on a flat surface using the metal tripod stand, adjust the distance and angle to the sound source for optimal capture, and set the input level in your recording or conferencing software. For best results, speak directly toward the front of the microphone where the cardioid pattern is most sensitive.

Recommendations

Place the microphone on a stable surface and maintain a consistent distance from the sound source (typically 10–30 cm) to ensure even levels. Use a pop filter or windscreen to reduce plosive sounds and set input gain so that loud passages do not clip. Avoid placing the microphone near noisy fans or open windows to minimise background noise.