Lexmark CCD kabel skenera

Inside countless Lexmark scanners, a single ribbon-like cable quietly carries the image signal from the CCD sensor to the main board. When that cable fails, scans become streaky, intermittent, or stop altogether. The Lexmark 41X1445 is the exact replacement flat flex cable (FFC) that restores reliable scanning. It is a 24-pin, 0.5 mm pitch, 300 mm long FFC with Type A orientation (contacts on the same side at both ends), built with tinned copper conductors and PET insulation for high flexibility and long service life.

Key specifications

• Type: Flat Flex Cable (FFC) for internal data transfer
• Function: Connects CCD image sensor unit to main logic board
• Connectors: ZIF/LIF FFC connectors, 24-pin, 0.5 mm pitch
• Length: 300 mm
• Width: 12.5 mm
• Orientation: Type A (contacts on same side)
• Conductor material: Tinned copper
• Insulation material: PET (Polyethylene Terephthalate)
• Colour: Blue/White
• Condition: New replacement part

Why choose it

This cable is engineered to match original Lexmark specifications, ensuring a secure connection and consistent signal integrity. Its high-flexibility design withstands repeated movement inside the scanner, reducing the risk of future failures. Using a genuine replacement part avoids compatibility issues and maintains scan quality.

Ideal use cases

• Repairing Lexmark scanners with faulty CCD data cables
• Replacing worn or damaged internal FFCs during maintenance
• Restoring scanners used in offices, archives, or service bureaus

Good to know

Before ordering, verify that your Lexmark scanner model uses a 24-pin, 0.5 mm pitch, 300 mm Type A FFC. Installation requires opening the scanner and carefully seating the cable in the ZIF/LIF connectors. This part is intended for qualified technicians or experienced DIY repairers.