KVM kabel Trendnet TK-CU15 crni 4,5 m

The TRENDnet TK-CU15 KVM cable is a 2-in-1 USB KVM cable designed to connect a computer to compatible TRENDnet KVM switches (models TK-803R and TK-1603R). The cable combines a USB keyboard/mouse lead with a VGA/SVGA HDB 15 monitor lead into a single flexible, low-profile assembly. This black cable has a length of 4.5 m and supports USB 1.1 connectivity for keyboard and mouse signals.

Advantages

The combined design reduces cable clutter by integrating video and USB leads into one unit. Its low-profile, flexible construction simplifies routing in rack or desktop installations. The 4.5 m length and standard HDB 15 plus USB connectors provide compatibility with a wide range of legacy VGA monitors and TRENDnet KVM switches. The cable is lightweight (approximately 0.42 kg) for easy handling and installation.

Suitable for

• Connecting a single PC to TRENDnet TK-803R or TK-1603R KVM switches
• Environments requiring combined video and USB keyboard/mouse connections
• Rack or desktop setups where a 4.5 m cable length is appropriate

Key specifications

• Length: 4.5 m
• Connectors: VGA/SVGA HDB-15 (monitor) and USB 1.1 (keyboard/mouse)
• Compatible KVM models: TRENDnet TK-803R, TK-1603R
• Colour: Black
• Weight: 0.42 kg

How to use

Connect the HDB-15 connector to the monitor port on the KVM switch and the corresponding VGA port on the computer. Plug the USB connector into the computer’s USB port to provide keyboard and mouse signal passthrough to the KVM switch. Verify that the KVM switch is powered and configured according to the TRENDnet switch instructions, then use the KVM controls to switch between connected computers.

Recommendations

For reliable operation, route the cable away from high-power electrical cables and sharp edges, and avoid excessive bending at connector ends. Use the 4.5 m length to place the computer within reasonable distance of the KVM switch; for longer runs, select an appropriate longer cable model.