Kombinirani ključ Gedore 6080330

Combination Wrench Gedore 6080330 is a DIN 3113-style wrench with a 15° offset ring end and a UD profile. The shaft has a girder-pattern cross section for improved stiffness. Made from Gedore vanadium steel 31CrV3 and chrome-plated, the wrench has a length (depth) of 100 mm, height of 50 mm and a weight of 233 g.

Advantages

The 15° offset ring end facilitates access to fasteners in confined spaces while the UD profile on the ring improves engagement with bolt heads. The girder-pattern shaft increases rigidity without significantly increasing weight. Chrome plating provides corrosion resistance and simplifies cleaning. The use of 31CrV3 vanadium steel ensures wear resistance and strength appropriate for professional and DIY use.

Suitable for

Key specifications

How to use

Select the Combination Wrench Gedore 6080330 that matches the fastener size. Position the open or ring end on the fastener, ensuring full engagement of the UD profile with the bolt head. Use the 15° offset ring end to reach fasteners at an angle or in restricted spaces. Apply steady torque and avoid sudden impacts; avoid using the wrench as a hammer or lever extender. After use, wipe the chrome finish clean and store the wrench in a dry place.

Recommendations

For safe and long-lasting performance, do not exceed the intended hand-torque limits, inspect the wrench regularly for wear or damage, and keep the chrome surface free of corrosive substances. Use appropriate personal protective equipment when working on machinery.