Koaksijalni adapter DeLOCK 88853

The DeLOCK 88853 coaxial connector adapter links RF components using an RP-TNC female interface on one side and an SMA male interface on the other. It has nickel- and gold-plated contacts and a product depth of 26.7 mm; the adapter is supplied in a protective polybag and has a silver finish. The adapter is intended for reliable signal transmission in various radio frequency setups.

Advantages

The DeLOCK 88853 provides secure mechanical connection between RP-TNC and SMA interfaces, with corrosion-resistant nickel/gold plated contacts for consistent electrical performance. Its compact 26.7 mm depth and silver colour make it suitable for confined spaces and standard RF installations. Supplied in a polybag, it is protected during storage and transport.

Suitable for

Key specifications

How to use

Ensure both mating connectors are clean and undamaged. Screw the SMA male end carefully into the corresponding SMA female connector, and attach the RP-TNC side to the RP-TNC counterpart until a firm connection is achieved. Do not overtighten; hand-tighten and then use an appropriate torque wrench if specified by connected equipment. Verify signal continuity and correct orientation after installation.

Recommendations

Store the adapter in its polybag when not in use to reduce contamination. Avoid excessive bending or mechanical strain on attached cables; check connectors periodically for wear and replace the adapter if plating shows significant deterioration.