Kabel za prijenos podataka Digitus AK-610107-030-E

The Digitus Data Transfer Connection Cable AK-610107-030-E is a 3.0 m serial cable with D-Sub9 male connectors on both ends in beige. It is intended for reliable serial data transmission between devices with 9-pin D-Sub (DE-9) ports and designed to provide a stable, low-weight connection for equipment that uses RS-232 style interfaces.

Advantages

This molded D-Sub9 M/M cable offers a durable connector design and straightforward plug-and-play use without additional adapters. At 3.0 m length it provides flexibility for typical desktop and rack connections while remaining lightweight and easy to route. The cable supports standard serial communications where D-Sub9 wiring is required.

Suitable for

• Connecting RS-232 serial devices such as modems, routers, industrial controllers, and older PCs
• Point-to-point data transfer between serial equipment
• Service, configuration and diagnostics of network or industrial hardware with D-Sub9 ports

Key specifications

• Model: Digitus AK-610107-030-E
• Connector type: D-Sub9 male to D-Sub9 male (M/M)
• Length: 3.0 m
• Color: beige
• Weight: 150 g
• Packaging dimensions: 140 mm x 270 mm
• Category: Serial & Parallel cables

How to use

Ensure both devices are powered off or in a safe state for connection. Align and insert each D-Sub9 male connector into the corresponding 9-pin D-Sub (DE-9) female port, then secure the connectors with the thumbscrews if present. After connection, power on the devices and configure serial parameters (baud rate, parity, data bits, stop bits) as required by the equipment and software.

Recommendations

For reliable operation, avoid sharp bends and mechanical stress on the cable and secure connectors to prevent intermittent contacts. Use appropriate serial communication settings matching your devices; if ground loops or noise are observed, consider using shorter cabling or add line protection/filters as needed.