Korisnički račun Kontakt
Vaša košarica
DPD i FedEx – datum dostave na stranici proizvoda
Trebate pomoć? Pitajte našeg AI asistenta

Kabel EK Water Blocks EK, 0,15 m

Kabel EK Water Blocks EK, 0,15 m
Kabel EK Water Blocks EK, 0,15 m
6,78 €
PDF
PDF
Dostupnost 50 Šifra proizvoda 313436 Model 3831109869604 Jamstvo 2 godine

Dostava i povrat

Očekivana dostava ponedjeljak, 7. prosinca
Naš detaljni sustav za praćenje pošiljaka redovito će Vas obavještavati o statusu
Mogućnosti plaćanja
Platna karticaVisaMastercardPayPalApple PayGoogle PayBankovna uplata

Opis

EK-Cable Pump testing adapter is a short adapter cable designed to power a liquid cooling pump or a computer fan directly from a power supply via a SATA power connector. It allows connecting a pump with a 3- or 4-pin fan header to a SATA 15-pin power plug so the pump can be run without switching on the whole system—primarily intended for leak-testing and other pump-only tests. The cable length is approximately 15 cm and it is supplied as a single unit.

Advantages

The EK Water Blocks EK 0.15 m cable provides a compact and straightforward solution to run a pump or fan independently of the motherboard. Its SATA power connection makes it compatible with modern PSUs, and the short length reduces cable clutter during testing. The product complies with RoHS environmental standards and is delivered as a single-piece cable for immediate use.

Suitable for

  • Leak-testing a liquid cooling loop without powering the entire PC
  • Bench testing or troubleshooting a pump or fan
  • Temporary power supply for a pump during installation

Key specifications

  • Connectors: 3-/4-pin fan header to SATA 15-pin power
  • Length: approximately 0.15 m (15 cm)
  • Quantity: 1 cable per package
  • RoHS compliant
  • Brand: ek water blocks
  • Origin: China
  • MPN / EAN: 3831109869604

How to use

Connect the fan-style 3- or 4-pin plug of the adapter to the pump or fan header, and plug the SATA 15-pin end into an available SATA power socket on the PSU. Ensure the PSU is powered on while the rest of the system remains off if you only intend to run the pump for testing. Verify correct connector seating and monitor the pump for proper operation during the leak test.

Recommendations

Use this cable only for testing and temporary powering of pumps or fans. Do not use it as a permanent substitute for proper motherboard power connections. Always follow standard safety procedures when working with powered components and ensure the power supply is connected securely.
Ključne značajke
  • Leak-testing a liquid cooling loop without powering the entire PC
  • Bench testing or troubleshooting a pump or fan
  • Temporary power supply for a pump during installation
  • Connectors: 3-/4-pin fan header to SATA 15-pin power
  • Length: approximately 0.15 m (15 cm)
  • Quantity: 1 cable per package
  • RoHS compliant
  • Brand: ek water blocks
  • Origin: China
  • MPN / EAN: 3831109869604

Specifikacije

Specifikacije
Boja proizvoda
Crna
Duljina kabela
0.15 m
Količina po pakiranju
1 pc(s)
Konektor 2
SATA 15-pinski
Potvrde o sukladnosti
RoHS
Priključak 1
3-pin
Spol konektora 1
Muški
Spol konektora 2
Muški
Zemlja podrijetla
Kina
Povijest cijene u posljednjih 6 mjeseci
Kabel EK Water Blocks EK, 0,15 m
Trenutačna cijena
6,78 €
Najniža cijena 7 d.
6,72 €
Najviša cijena 7 d.
6,78 €
Promjena 24 h
0,00 €   0%
Promjena 7 d.
+0,06 €   +1%
Promjena 30 d.
0,00 €   0%

Napiši recenziju

Ocjena *
Napomena: HTML se ne prevodi!

Više EK Water Blocks proizvoda u ovoj kategoriji

12

Popularni proizvodi u ovoj kategoriji

7
Prodavatelj: UAB KUR LT · Gariūnų g. 57-14, LT-02300 Vilnius, Litva · Matični broj 303192950 · PDV ID LT100008198612 · Isporuka iz EU-a (Litva)
WhatsApp
Messenger
Pozdrav, ja sam AI asistent DistriNodea. Mogu Vam pomoći pronaći proizvode, usporediti mogućnosti, izraditi ponude u PDF formatu ili otvoriti zahtjev za podršku.
Sve kategorije