InLine patch kabel SF/UTP Cat.5e žuti 30m

The InLine Patch Cable SF/UTP Cat.5e in yellow, 30 m long, is a twisted-pair network cable for connecting devices with RJ45 ports. Designed for Gigabit Ethernet, it supports data rates up to 1000 Mbps and a maximum frequency of 125 MHz. The SF/UTP shielding reduces electromagnetic interference, improving signal integrity in structured cabling for home and office networks.

Advantages

SF/UTP Cat.5e construction offers improved protection against external interference compared with unshielded cables, while the 30 m length provides flexibility for longer runs without additional patching. The cable is suitable for standard RJ45 terminations and installations where a visible yellow color aids identification and cable management.

Suitable for

• Connecting switches, routers and network sockets
• Patch panels and network cards
• Gigabit Ethernet (1 Gb/s) links up to 30 m
• Home and small office structured cabling

Key specifications

• Standard: Cat.5e
• Shielding: SF/UTP (overall braid + foil around pairs)
• Length: 30 m
• Data rate: up to 1000 Mbps
• Maximum frequency: 125 MHz
• Connectors: RJ45
• Color: Yellow
• Brand: InLine
• MPN: 72530Y
• EAN: 4043718008308

How to use

Connect one RJ45 plug to your network device (switch, router or network card) and the other end to the target socket, patch panel or another device. Ensure connectors are fully seated to establish a stable Gigabit link. Route the cable to avoid sharp bends and sources of strong electromagnetic noise. Use appropriate cable management accessories to prevent strain on connectors and to maintain neat installation.

Recommendations

For optimal performance, keep individual cable runs under the recommended maximum length for active devices and avoid running the cable in parallel with high-voltage power lines. If additional shielding is required at both ends, verify that connected equipment supports shielded cabling and proper grounding.