InLine patch kabel SF/UTP Cat.5e crni 3 m

InLine Patch Cable SF/UTP Cat.5e black 3m is a Cat.5e twisted-pair network cable designed for connecting network components with RJ45 ports, including switches, routers, wall sockets, patch panels and network cards. The cable supports Gigabit Ethernet (up to 1000 Mbit/s) and is rated for frequencies up to 125 MHz. It features SF/UTP shielding to reduce electromagnetic interference and comes in a 3 m black jacket with RJ45 connectors on both ends.

Advantages

The SF/UTP construction provides improved protection against external interference compared with unshielded cables, helping to maintain stable data transfer at Gigabit speeds. The 3 m length offers flexibility for typical desk- and rack-level installations, and the standardized RJ45 connectors ensure compatibility with common network equipment. The black outer jacket provides a neutral appearance for office or home environments.

Suitable for

• Connecting switches, routers and network cards
• Linking patch panels and wall sockets
• Office or home Gigabit Ethernet connections up to 1 Gbit/s

Key specifications

• Category: Cat.5e (SF/UTP)
• Data rate: up to 1000 Mbit/s (1 Gbit/s)
• Maximum frequency: 125 MHz
• Length: 3 m
• Connectors: RJ-45 — both ends
• Colour: Black
• Standard: 10/100/1000Base-T(X)

How to use

Plug one RJ45 connector into the network port of your device (for example a PC, switch or router) and the other connector into the corresponding port on the network equipment or wall socket. Ensure connectors are fully inserted until the latch clicks to establish a reliable physical and data connection. Route the cable to avoid sharp bends and sources of strong electromagnetic interference for optimal performance.

Recommendations

For best results use this Cat.5e SF/UTP cable for short to medium runs within offices or homes; if longer runs or higher interference immunity are required, consider higher-category or fully shielded cabling (e.g., Cat.6/Cat.6a) according to installation needs.