InLine patch kabel SF/UTP Cat.5e crni 0,3m

The InLine Patch Cable SF/UTP Cat.5e black 0.3m is a short network patch cable with RJ-45 connectors on both ends, designed for connecting network components such as switches, routers, sockets, patch panels and network cards. It supports Gigabit Ethernet speeds up to 1000 Mbit/s at a maximum frequency of 125 MHz and features SF/UTP shielding to reduce electromagnetic interference.

Advantages

SF/UTP shielding improves resistance to external interference compared with unshielded cables, and the Cat.5e specification supports Gigabit data rates for typical local area network applications. The 0.3 m length is suitable for short patching runs in racks or between closely located devices, and the black jacket provides a discreet, uniform appearance.

Suitable for

• Short patch connections in server racks and network cabinets
• Connecting switches, routers and network cards over short distances
• Patch panels and wall sockets where a short jumper is required

Key specifications

• Standard: Cat.5e
• Shielding: SF/UTP
• Length: 0.3 m
• Connectors: RJ-45 – RJ-45
• Data rate: up to 1000 Mbit/s (Gigabit Ethernet)
• Maximum frequency: 125 MHz
• Colour: Black

How to use

Insert the RJ-45 plugs into the corresponding RJ-45 ports of the devices to be connected (for example switch to patch panel or switch to network card). Ensure connectors are fully seated and latched. Use the 0.3 m cable for short-distance routing to avoid excess cable length; avoid sharp bends near the connectors and do not subject the cable to heavy mechanical stress.

Recommendations

For optimal performance, route the cable away from strong sources of electromagnetic noise and avoid tight bundling with power cables. Verify connector wiring and device link speed settings when establishing Gigabit connections.