InLine patch kabel F/UTP Cat.5e crni 3m

The InLine Patch Cable F/UTP Cat.5e black 3m is a 3-meter network patch cable with F/UTP shielding and RJ-45 connectors on both ends. It is designed for reliable data transmission in LAN environments and reduces external interference to maintain stable Ethernet and Fast Ethernet connections between switches, routers, hubs, network cards and other active or passive network devices.

Advantages

F/UTP shielding provides improved protection against electromagnetic interference compared with unshielded cables. The Cat.5e specification supports Ethernet and Fast Ethernet data rates and common network protocols. Durable RJ-45 connectors ensure secure plug-in connections and simple installation. The 3 m length and black jacket provide a balance of reach and discreet appearance for typical desk-to-rack or patch panel connections.

Suitable for

• Connecting switches to patch panels or other switches
• Linking routers, hubs and print servers to network infrastructure
• Network cards to wall outlets or patch panels
• Short to medium cable runs in office and home LANs

Key specifications

• Cable category: Cat.5e
• Shielding: F/UTP (foil shield around all pairs)
• Length: 3 m
• Connectors: RJ-45 to RJ-45
• Colour: Black
• Brand: InLine
• MPN: 71503S
• EAN: 4043718085712

How to use

Plug one RJ-45 connector into the network port of your switch, router, hub, network card or patch panel and insert the other connector into the corresponding port on the target device. Ensure connectors click into place to confirm a secure connection. Route the cable to avoid tight bends and sources of strong electromagnetic noise. For best signal integrity, avoid stretching the cable and keep it away from power cables where possible.

Recommendations

For stable performance, use this Cat.5e F/UTP patch cable for runs up to typical 3 m lengths and within LAN environments; replace the cable if connectors or jacket show visible wear. For installations requiring higher bandwidth or future-proofing, consider using Cat.6 or higher-rated shielded cables.