Hypertec 127513-HY DVI kabel 3 m DVI-D crni

The Hypertec 127513-HY 3 m DVI-D Black cable is a three-metre digital video cable designed to transmit high-quality video signals between DVI-D equipped devices. It has DVI-D connectors on both ends and a black jacket that provides a discreet visual appearance. The cable is intended to maintain signal integrity over its 3 m length for connecting digital displays, projectors or graphics cards where a DVI-D interface is required.

Advantages

This DVI-D cable offers a straightforward solution for digital-only video connections, reducing analog conversion and preserving image clarity. The matched DVI-D connectors ensure a snug fit with compatible ports, and the 3 m length gives flexibility for desktop and AV setups without excessive slack. The black outer jacket is resistant to everyday wear and blends with typical AV installations.

Suitable for

Key specifications

How to use

Confirm both source and display devices have DVI-D ports and power them off before connecting. Insert each DVI-D connector firmly into the corresponding port until the connector seats and any fastening screws (if present) are secured to prevent movement. Power the devices on and select the DVI input on the display if necessary. Adjust display resolution and refresh rate in the source device settings to match the monitor's supported modes for optimal image quality.

Recommendations

For best results, route the cable to avoid sharp bends and heavy compression; avoid running parallel to high-power cables to reduce potential interference. Use the 3 m length to position devices with minimal strain on connectors. If adapters are required to connect to different interfaces, ensure they support digital DVI-D signals and do not convert to analog formats.