Gedore 6577270 viljuškasti ključ

The Gedore 6577270 open end wrench is manufactured from vanadium steel (31CrV3) and conforms to DIN 894 and ISO 3318. The jaws are set at a 15° angle. Finishes vary by size: manganese‑phosphate coating for sizes up to 38 mm and steel‑grey finish from 41 mm and larger. Available in sizes from 10 to 135 mm; larger sizes include a hanging hole. This model is supplied under Gedore part number 6577270 (EAN 4010886657720) and weighs approximately 1.12 kg.

Advantages

The open end wrench offers precise fit and reliable strength due to vanadium steel construction and standardized jaw geometry. The 15° angled jaws improve access in confined spaces. Size-dependent surface treatments enhance corrosion resistance and handling. A hanging hole on larger sizes allows convenient storage.

Suitable for

Key specifications

How to use

Select the correct wrench size matching the nut or bolt head. Position the open jaws securely over the flat sides of the fastener, keeping the wrench at the intended 15° angle when access is limited. Apply steady force, pulling the wrench toward you where possible to reduce slipping. For repeated or high‑torque work, verify that the wrench fits tightly and that the fastener is undamaged before use.

Recommendations

Inspect the wrench for wear or deformation before use; do not use if jaws are rounded or the tool is cracked. Use the correct size to avoid damaging fasteners. Store larger sizes by hanging on a pegboard when possible to protect the finish.