FEIN 63502166210 list pile za MultiMaster alate 9 cm

The FEIN 63502166210 saw blade for MultiMaster tools is a segmented 9 cm blade designed for cutting marble, epoxy resin and trass joints. It is also suitable for very hard epoxy or cement joints and is intended for frequent use and demanding jobs. Cutting width is approximately 2.2 mm and the segmented design makes it ideal for working in corners and on edges without overcutting.

Advantages

The segmented geometry provides precise control when cutting corners and edges while reducing the risk of overcutting. The blade construction offers long service life even when working with hard joint materials such as epoxy or cement. Its 9 cm diameter and narrow cutting width allow for accurate cuts in confined areas and for renovation or finishing tasks.

Suitable for

• Cutting marble tiles and trims
• Removing or trimming epoxy resin joints
• Cutting hard cement-based joints and trass mortar
• Corner and edge work where controlled, narrow cuts are required

Key specifications

• Brand: Fein
• Model / MPN: 63502166210
• Compatibility: FEIN MultiMaster multi-tools
• Diameter: 9 cm
• Cutting width: approx. 2.2 mm
• Type: Segmented saw blade for joint and tile cutting
• EAN: 4014586390536

How to use

Install the blade on a compatible FEIN MultiMaster according to the tool manufacturer's instructions, ensuring the tool is disconnected from power before fitting. Select an appropriate oscillation speed for the material and make test cuts on scrap material if possible. Position the blade carefully at the joint or edge and apply steady, moderate pressure; avoid forcing the blade to prevent damage and excessive wear. For corner work, use the segmented sections to guide controlled cuts and finish with a fine pass if necessary.

Recommendations

Use personal protective equipment (safety goggles, dust mask and gloves) and secure the workpiece before cutting. For prolonged or heavy-duty cutting, periodically inspect the blade for wear and replace when cutting performance decreases or the segments show damage.