Ethernet patch kabel QOLTEC CAT6 UTP, 50 m, crni

QOLTEC CAT6 UTP Ethernet patch cord cable, 50 m in black, is an unshielded twisted pair cable designed for LAN installations and horizontal network runs. The cable supports Gigabit Ethernet speeds typical for Category 6 specifications and is supplied as a single 50-meter reel with a flexible outer jacket for easier routing and cable management in offices, server rooms and home networks.

Advantages

The cable offers Category 6 performance for stable Gigabit connections over standard LAN distances while remaining unshielded for cost-effective installations. Its flexible jacket simplifies installation in conduits, cable trays and around corners. The single 50 m length reduces the need for multiple patch cords and minimizes signal loss caused by additional connectors. The black outer sheath provides discreet appearance in professional and residential environments.

Suitable for

Key specifications

How to use

Measure and route the 50 m cable from the network device to the patch panel, switch or wall outlet following building codes and cable management practices. Terminate each end with compatible RJ45 connectors or use pre-terminated patch panels or keystone jacks. Avoid tight bends and excessive pulling force during installation to maintain performance. If cutting the reel, strip and punch down or crimp connectors according to standard wiring schemes (T568A or T568B) and test the link with a network tester to verify continuity and performance.

Recommendations

For best results, keep the cable away from sources of electromagnetic interference such as power lines and fluorescent lighting. Use appropriate cable management, strain relief and avoid kinking the cable. For runs requiring higher shielding or 10 Gbps speeds over longer distances, consider shielded Cat6A or higher-category cabling.