Korisnički račun Kontakt
Vaša košarica
DPD i FedEx – datum dostave na stranici proizvoda
Trebate pomoć? Pitajte našeg AI asistenta

eSUN PLA-BASIC 1,75 mm narančasti 1 kg nadomjesni filament

eSUN PLA-BASIC 1,75 mm narančasti 1 kg nadomjesni filament
eSUN PLA-BASIC 1,75 mm narančasti 1 kg nadomjesni filament
34,24 €
PDF
PDF
Dostupnost 4 Šifra proizvoda 3365066 Model PLA-BASIC175O1R1 Jamstvo 2 godine

Dostava i povrat

Očekivana dostava utorak, 8. prosinca
Naš detaljni sustav za praćenje pošiljaka redovito će Vas obavještavati o statusu
Mogućnosti plaćanja
Platna karticaVisaMastercardPayPalApple PayGoogle PayBankovna uplata

Opis

For makers who demand reliability on long, intricate prints, this orange PLA-BASIC refill keeps your spool holder stocked without the waste of a new reel. The vivid orange shade is ideal for functional prototypes, mechanical parts, and eye-catching display models where strength and a clean finish matter.

Key specifications

  • Material: PLA+ (Polylactic Acid Plus)
  • Diameter: 1.75 mm (±0.03 mm tolerance)
  • Net weight: 1 kg refill (no spool)
  • Print temperature: 205–225 °C
  • Bed temperature: 45–60 °C (or unheated)
  • Print speed: 40–100 mm/s
  • Tensile strength: 50–70 MPa
  • Elongation at break: 30%
  • Heat deflection temperature: 52 °C (0.45 MPa)
  • Density: 1.24 g/cm³
  • Melt flow index: 2–5 g/10 min (190 °C/2.16 kg)
  • Vacuum-sealed with desiccant

Why choose it

PLA-BASIC from eSUN delivers the easy printing you expect from PLA with improved toughness and layer adhesion. The tight diameter tolerance ensures consistent extrusion, reducing clogs and under-extrusion. As a refill, it cuts down on plastic spool waste and lowers cost per gram. The bright orange colour is consistent batch-to-batch, so multi-part prints match perfectly.

Ideal use cases

  • Functional prototypes that need a bit more impact resistance than standard PLA
  • Mechanical parts, brackets, and enclosures
  • Educational projects and STEM kits
  • Artistic models and display pieces where colour pop is essential
  • Print farms looking to reduce spool waste and storage space

Good to know

This is a refill: wind it onto a reusable spool before printing. Store in a dry box after opening; while it ships vacuum-sealed with desiccant, PLA can absorb moisture over time. For best results, use a hardened nozzle if you print frequently—PLA+ is slightly more abrasive than standard PLA. No heated bed is required, but a bed temperature of 45–60 °C improves adhesion on large flat parts.

Specifikacije

Specifikacije
Boja proizvoda
Narančasta
Boje ispisa
Narančasta
Bruto dubina (mm)
200
Bruto širina (mm)
200
Bruto težina
1.29 kg
Bruto visina (mm)
64
EAN
6922572211544
Kategorija
Filament za 3D pisač
Količina u pakiranju
1
Marka
eSUN
Materijal
PLA+
Model
PLA-BASIC175O1R1
MPN
PLA-BASIC175O1R1
Neto težina
1 kg
Proizvođač
eSUN
Težina
1.29 kg
Vrsta
filament
Vrsta proizvoda
Filament za 3D pisač
Povijest cijene u posljednjih 6 mjeseci
eSUN PLA-BASIC 1,75 mm narančasti 1 kg nadomjesni filament
Trenutačna cijena
34,24 €
Najniža cijena 7 d.
33,81 €
Najviša cijena 7 d.
34,24 €
Promjena 24 h
0,00 €   0%
Promjena 7 d.
+0,43 €   +1%
Promjena 30 d.
0,00 €   0%

Napiši recenziju

Ocjena *
Napomena: HTML se ne prevodi!

Više ESUN proizvoda u ovoj kategoriji

12

Popularni proizvodi u ovoj kategoriji

8
Prodavatelj: UAB KUR LT · Gariūnų g. 57-17, LT-02300 Vilnius, Litva · Matični broj 303192950 · PDV ID LT100008198612 · Isporuka iz EU-a (Litva)
WhatsApp
Messenger
Pozdrav, ja sam AI asistent DistriNodea. Mogu Vam pomoći pronaći proizvode, usporediti mogućnosti, izraditi ponude u PDF formatu ili otvoriti zahtjev za podršku.
Sve kategorije