Equip Cat.6A U/UTP patch kabel, 3m, bijeli

The Equip Cat.6A U/UTP Patch Cable (3 m) is a high-performance network cable engineered for fast, reliable data transmission. Designed for 10GBase-T environments, this white patch cable uses RJ-45 connectors with gold plating and U/UTP construction to minimise interference and support data rates up to 10000 Mbit/s. It is suitable for structured cabling, workstations and network equipment interconnections where stable, low-error performance is required.

Advantages

The Equip Cat.6A cable provides higher bandwidth and an improved signal-to-noise margin compared with lower-category cables, enabling ultrahigh and error-reduced performance in demanding network environments. Gold-plated RJ-45 connectors enhance contact reliability and corrosion resistance, while the U/UTP design limits external electromagnetic interference. The 3 m length offers flexibility for typical patching scenarios.

Suitable for

• 10GBase-T networks and high-speed LAN connections
• Connecting switches, routers, patch panels and workstations
• Office and server-room structured cabling

Key specifications

• Cable length: 3 m
• Connectors: RJ-45 to RJ-45
• Category: Cat.6A U/UTP
• Rated speed: up to 10000 Mbit/s (10 Gbit/s)
• Cabling technology: 10GBase-T
• Colour: White
• Weight: 0.105 kg
• Brand: EQUIP, MPN: 603004, EAN: 4015867206591

How to use

Connect one RJ-45 plug to your network device (switch, router or NIC) and the other to the corresponding port on the target device or patch panel. Ensure connectors are fully inserted until the latch clicks. Route the cable to avoid sharp bends and sources of strong electromagnetic interference for optimal performance. For permanent installation, secure the cable with appropriate cable management accessories without excessive tension.

Recommendations

Use the Equip Cat.6A patch cable in short-range patching within racks or between nearby devices; avoid running alongside high-voltage power lines to maintain signal integrity.