Equip Cat.6A Platinum S/FTP patch kabel, 15m, plavi

The Equip Cat.6A Platinum S/FTP Patch Cable (15 m, blue) is a high-performance network cable engineered for demanding environments and 10GBase-T applications. Constructed from quality materials and tested to meet Cat.6A standards, it provides higher bandwidth and improved signal-to-noise margin for stable, low-error data transmission up to 10000 Mbit/s. The cable uses gold-plated RJ-45 connectors and full S/FTP shielding to reduce interference and ensure reliable connections.

Advantages

Equipped with S/FTP shielding and gold-plated RJ-45 connectors, the Cat.6A Platinum cable offers enhanced protection against electromagnetic interference and consistent contact performance. Its design supports ultrahigh data rates and improved signal integrity over longer runs compared with lower-category cables. The 15 m length and blue jacket make it suitable for visible horizontal and patching applications.

Suitable for

• 10GBase-T networks and high-speed Ethernet connections
• Server rooms, data centers and network racks
• Office horizontal cabling and patch panels
• Applications requiring reduced interference and stable throughput

Key specifications

• Category: Cat.6A (S/FTP)
• Length: 15 m
• Connectors: RJ-45 — RJ-45, gold-plated
• Rated speed: up to 10000 Mbit/s (10G)
• Cabling technology: 10GBase-T
• Colour: Blue
• Weight: 0.564 kg
• Brand: EQUIP, MPN: 605638, EAN: 4015867152539

How to use

Plug one gold-plated RJ-45 connector into the network port of your device or patch panel and the other into the corresponding switch, router or wall outlet. Ensure connectors are fully inserted until the latch clicks. Route the cable to avoid sharp bends and electromagnetic sources; maintain proper bend radius and do not overload cable trays. For best 10G performance, connect between compatible 10GBase-T ports and test the link after installation.

Recommendations

For optimal performance, use the patch cable in environments compliant with structured cabling guidelines, avoid bundling with power cables, and verify compatibility with network equipment supporting 10GBase-T. Periodically inspect connectors for damage and replace the cable if shielding or jacket integrity is compromised.