Equip Cat.6 U/UTP patch kabel, 15m, crveni

The Equip Cat.6 U/UTP Patch Cable is a 15 m red network cable designed for reliable high-speed Ethernet connections. It has RJ-45 connectors on both ends and gold-plated contacts to maintain signal integrity. The cable supports 10GBase-T data transmission and is suitable for demanding home and office network environments where reduced interference and stable throughput are required.

Advantages

The cable provides higher bandwidth and an improved signal-to-noise margin compared with lower-category cables, enabling ultrahigh and low-error performance. Gold-plated RJ-45 contacts enhance contact reliability and corrosion resistance. The U/UTP design reduces electromagnetic interference while keeping installation flexible thanks to its 15 m length and standard RJ-45 terminations.

Suitable for

• Connecting switches, routers and patch panels in LANs
• High-speed data transfer up to 10 Gbit/s (10GBase-T)
• Wiring in home offices and small to medium business networks
• Temporary or permanent patching over distances up to 15 m

Key specifications

• Cable length: 15 m
• Connectors: RJ-45 — both ends
• Cabling technology: 10GBase-T (Cat.6, U/UTP)
• Maximum data rate: up to 10000 Mbit/s
• Weight: 0.328 kg
• Colour: Red
• Brand: EQUIP, MPN: 625428, EAN: 4015867172155

How to use

Plug one RJ-45 connector into the network port of your device (switch, router, network interface) and the other connector into the corresponding port on the remote device or patch panel. Ensure connectors are fully seated until the latch clicks. Route the cable to avoid sharp bends and sources of strong electromagnetic interference. For best performance, avoid kinking the cable and maintain recommended bend radius for Cat.6 cabling.

Recommendations

For reliable 10GBase-T performance, use this Cat.6 U/UTP patch cable for connections up to 15 m and avoid bundling with power cables; verify network equipment supports 10G speeds when planning high-bandwidth links.