Korisnički račun Kontakt
Vaša košarica
DPD i FedEx – datum dostave na stranici proizvoda
Trebate pomoć? Pitajte našeg AI asistenta

Držač CPU-a za montažu na stol LogiLink EO0031

Držač CPU-a za montažu na stol LogiLink EO0031
Držač CPU-a za montažu na stol LogiLink EO0031
Držač CPU-a za montažu na stol LogiLink EO0031
Držač CPU-a za montažu na stol LogiLink EO0031
Držač CPU-a za montažu na stol LogiLink EO0031
Držač CPU-a za montažu na stol LogiLink EO0031
Držač CPU-a za montažu na stol LogiLink EO0031
Držač CPU-a za montažu na stol LogiLink EO0031
Držač CPU-a za montažu na stol LogiLink EO0031
Držač CPU-a za montažu na stol LogiLink EO0031
Držač CPU-a za montažu na stol LogiLink EO0031
Držač CPU-a za montažu na stol LogiLink EO0031
Držač CPU-a za montažu na stol LogiLink EO0031
Držač CPU-a za montažu na stol LogiLink EO0031
Držač CPU-a za montažu na stol LogiLink EO0031
Držač CPU-a za montažu na stol LogiLink EO0031
Držač CPU-a za montažu na stol LogiLink EO0031
Držač CPU-a za montažu na stol LogiLink EO0031
50,56 €
PDF
PDF
Dostupnost 93 Šifra proizvoda 108814 Model EO0031 Jamstvo 2 godine

Dostava i povrat

Očekivana dostava utorak, 1. prosinca
Naš detaljni sustav za praćenje pošiljaka redovito će Vas obavještavati o statusu
Mogućnosti plaćanja
Platna karticaVisaMastercardPayPalApple PayGoogle PayBankovna uplata

Postavite pitanje – AI asistent odgovara odmah.

Opis

The LogiLink EO0031 desk-mounted CPU holder is a compact bracket engineered to secure tower and small-form computer chassis to the underside or side of a desk. It accepts chassis widths from 8.8 cm to 20.3 cm and supports case heights starting at 30 cm, providing a space-saving solution that keeps the case off the floor while maintaining accessibility. The holder is rated to carry up to 10 kg and comes in black finish. Its external dimensions are 175 mm (width) × 592 mm (depth) × 106 mm (height), which helps plan installation and clearance in typical workstation setups.

Advantages

The desk-mounted design reduces desk clutter and protects the PC from dust and floor-level damage while keeping ports and drives easily reachable. Adjustable width compatibility allows the holder to accommodate a broad range of chassis sizes without the need for multiple brackets. With a defined maximum weight capacity of 10 kg and clear dimensional specifications, the EO0031 offers predictable load handling and installation planning for office and home environments.

Suitable for

  • Mounting small-form and mid-tower PC cases under or beside desks
  • Home offices and corporate workstations where floor space should remain clear
  • Environments requiring easier access to rear ports and front drives
  • Settings where modest PC weight and compact dimensions are standard

Key specifications

  • Type: Desk-mounted CPU holder
  • Compatible chassis width: 8.8 cm – 20.3 cm
  • Minimum compatible chassis height: 30 cm
  • Maximum weight capacity: 10 kg
  • Product colour: Black
  • Holder dimensions (W × D × H): 175 mm × 592 mm × 106 mm

How to use

Position the LogiLink EO0031 at the chosen underside or side edge of the desk, verify available clearance against the holder dimensions, and adjust the bracket to match the width of the computer chassis between 8.8 cm and 20.3 cm. Secure the holder to the desk following the supplied mounting instructions and fasten the PC in the holder so that its base and sides are supported. After installation, check that the case weight does not exceed 10 kg and that ventilation and cable routing are not obstructed.

Recommendations

Use the holder on desks with sufficient structural strength to carry the PC plus dynamic loads. Regularly inspect mounting points and fasteners for tightness and ensure the installed chassis weight remains within the 10 kg limit; avoid using the holder with oversized or heavy server-grade enclosures.

Ključne značajke
  • Mounting small-form and mid-tower PC cases under or beside desks
  • Home offices and corporate workstations where floor space should remain clear
  • Environments requiring easier access to rear ports and front drives
  • Settings where modest PC weight and compact dimensions are standard
  • Type: Desk-mounted CPU holder
  • Compatible chassis width: 8.8 cm – 20.3 cm
  • Minimum compatible chassis height: 30 cm
  • Maximum weight capacity: 10 kg
  • Product colour: Black
  • Holder dimensions (W × D × H): 175 mm × 592 mm × 106 mm

Specifikacije

Specifikacije
Boja proizvoda
Crna
Certifikacija
RoHS
Dimenzije pakiranja (ŠxDxV)
518 x 172 x 210
Dubina
592 mm
Harmonizirani sustav (HS) kod
84733080
Jednostavna ugradnja
Da
Količina
1
Kut rotacije
360 °
Maksimalna nosivost
10 kg
Podešavanje visine
Da
Podesiva širina
Da
Podržana širina računala (vodoravno) (maks.)
203 mm
Podržana širina računala (vodoravno) (min.)
88 mm
Podržana visina računala (vodoravno) (maks.)
510 mm
Podržana visina računala (vodoravno) (min.)
300 mm
Preporučena vrsta kućišta
Univerzalno
Priručnik
Da
Raspon kuta zakretanja
-180 - 180
Širina
175 mm
Težina pakiranja
4840 g
Vijci u kompletu
Da
Visina
106 mm
Vrsta
Držač CPU-a za montažu na stol
Zemlja podrijetla
Kina

Letak

Otvori Letak
Povijest cijene u posljednjih 6 mjeseci
Držač CPU-a za montažu na stol LogiLink EO0031
Trenutačna cijena
50,56 €
Najniža cijena 7 d.
49,98 €
Najviša cijena 7 d.
50,56 €
Promjena 24 h
0,00 €   0%
Promjena 7 d.
+0,59 €   +1%
Promjena 30 d.
0,00 €   0%

Napiši recenziju

Ocjena *
Napomena: HTML se ne prevodi!

Popularni proizvodi u ovoj kategoriji

6
Prodavatelj: UAB KUR LT · Gariūnų g. 57-14, LT-02300 Vilnius, Litva · Matični broj 303192950 · PDV ID LT100008198612 · Isporuka iz EU-a (Litva)
WhatsApp
Messenger
Pozdrav, ja sam AI asistent DistriNodea. Mogu Vam pomoći pronaći proizvode, usporediti mogućnosti, izraditi ponude u PDF formatu ili otvoriti zahtjev za podršku.
Sve kategorije