Datalogic CAB-448 kabel 9-pinski D-konektor 2 m

The Datalogic CAB-448 is a 2 m straight RS232 direct-connect cable with a 9‑pin D (female) connector and a socket designed for connecting PowerScan 8000/7100 scanners to compatible hosts. It supports direct connection to IBM PC/PC‑clone serial ports and specific NCR terminal models, and is intended for use without an external power supply.

Advantages

This 2‑meter CAB-448 cable provides a reliable wired RS232 interface with a standard 9‑pin D connector, offering stable data transmission for scanning workflows. Its straight design and industry-standard pinout ensure compatibility with PC serial ports and selected terminals, while the moderate length balances reach and cable management.

Suitable for

• Connecting Datalogic PowerScan 8000 and PowerScan 7100 scanners to IBM PC or PC‑clone serial ports
• Connecting scanners to NCR terminal type 7452
• Data transfer and integration in POS, inventory, and industrial scanning setups using RS232

Key specifications

• Manufacturer: Datalogic
• Model / MPN: CAB-448
• Connector: 9‑pin D (female) straight
• Cable length: 2 m (6')
• Interface: RS232 (direct‑connect)
• Power: no external power supply (power off)

How to use

Plug the 9‑pin D connector into the host device serial port and connect the other end to the Datalogic PowerScan 8000/7100 scanner socket. Ensure the host serial port settings (baud rate, parity, data bits, stop bits) match the scanner configuration. No external power supply is required; the cable provides only data connection. Secure cable routing to avoid strain on connectors.

Recommendations

For reliable operation, use the CAB-448 with compatible Datalogic PowerScan models and a properly configured RS232 serial port. Avoid sharp bends and excessive tension on the cable; keep the length appropriate for your installation to reduce signal interference.