Audio kabel XLR 3-pinski Omnitronic 30220632

The Omnitronic 30220632 is a 3-meter professional audio cable with a male XLR (3-pin) connector on one end and a female XLR (3-pin) connector on the other. This black cable is built for reliable signal transmission between microphones, mixers, stage boxes and other balanced audio equipment. Its construction focuses on consistent audio quality and durability for use in studio and live sound environments.

Advantages

This XLR cable provides balanced audio transmission to reduce noise and interference over its 3 m length. The standard 3-pin connectors ensure compatibility with a wide range of microphones and audio devices, while the robust outer sheath and connector housings offer mechanical protection and extended service life. The cable's construction supports low handling noise and stable contact between devices for reliable operation during rehearsals, recordings and live performances.

Suitable for

Key specifications

How to use

Connect the male XLR plug to the input or output of the source device and the female XLR to the destination device, ensuring the connectors fully seat and the locking latch engages where present. Use the cable for balanced signal connections to minimize hum and interference; avoid sharp bends and excessive tension on the cable to maintain audio quality. When routing the cable on stage or in the studio, keep it separated from power cables to reduce electromagnetic noise pickup.

Recommendations

Inspect connectors periodically for secure contact and clean contacts if required. Store the cable coiled without tight kinks and avoid stepping on connectors during use. For longer runs or critical installations consider using appropriately rated cable lengths and professional cable management to preserve signal integrity.