ALLNET 4duino magnetski ventil (ALL-4 duino-Mag-Ven)

The ALLNET 4duino Solenoid Valve (ALL-4duino-Mag-Ven) is a reliable normally closed (NC) solenoid valve designed for precise control of water and non-corrosive liquids. Operating at 12V DC with low power consumption of 3W, it is ideal for automation projects, irrigation systems, and DIY electronics. The valve features G1/2" BSP threads for easy installation and is built with durable engineering plastic and NBR seals for long-lasting performance.

Advantages

This solenoid valve offers energy-efficient operation with a low current draw of 250 mA, making it suitable for battery-powered or low-power systems. Its normally closed design ensures fail-safe operation, cutting off flow when power is lost. The compact size and threaded mounting allow for flexible integration into various setups.

Suitable for

• Automated irrigation systems
• Hydroponics and aquaponics
• DIY electronics and microcontroller projects (Arduino, Raspberry Pi)
• Water level control and dispensing
• Industrial and laboratory fluid control

Key specifications

• Operating Voltage: 12V DC
• Operating Current: 250 mA
• Power Consumption: 3 W
• Valve Type: Normally Closed (NC)
• Inlet/Outlet Thread Size: G1/2" (1/2 inch BSP)
• Operating Pressure Range: 0.02 - 0.8 MPa (0.2 - 8 bar)
• Fluid Compatibility: Water, non-corrosive liquids
• Fluid Temperature Range: 1 - 80 °C
• Ambient Temperature Range: 1 - 40 °C
• Body Material: Engineering Plastic (e.g., Nylon)
• Seal Material: NBR (Nitrile Butadiene Rubber)
• Flow Direction: Unidirectional (marked)
• Coil Type: DC Solenoid
• Mounting: Threaded / Panel Mount
• Electrical Connection: 2-wire leads

Recommendations

For best performance, use a regulated 12V DC power supply capable of delivering at least 500 mA. Ensure the valve is installed in the correct flow direction as indicated on the body. Suitable for indoor use only; protect from freezing temperatures.